McIntosh UR12 manual Setting the Date and Clock, Program Loading, Port on the computer

Page 28

Setting the Date and Clock

1.Enter the Setting mode by pressing both the MAIN and PAGE Push-but- tons simultaneously for five seconds.

2.Move the cursor on the Touch Screen to 6. SET DATE & CLOCK by using the joystick. Enter this mode by push- ing the joystick down. Refer to figure 19.

3.Press the selection you wish to change from the Touch Screen and change it using the UP and DOWN buttons. Once you complete the settings, store them by pressing the SAVE button.

Figure 19

Program Loading

This program enables you to both up load the program to PC as well as down load from PC using the UR12 Upload Data Cable.

1.Connect the 1/8 inch stereo mini phone plug end of the Upload Data Cable to the jack on the bottom end of the UR12 Remote Control. Refer to figure 21.

2.Connect the DB9 connector end of the Upload Data Cable to the Serial Com

Port on the computer.

1. Enter the Setting mode by pressing both the MAIN and PAGE Push-but- tons simultaneously for five seconds.

2. Move the cursor on the Touch Screen to 7. PROGRAM LOADING by us- ing the joystick. Enter this mode by pushing the joystick down. Refer to

figureOPERATING20UP. LOADPCPROGRAMINTERFCE

LEARNEDUPDOWNDOWNLOADLOADLOADPROGRAM

PROGRAM VERSION_.__

Figure 20

28

Image 28
Contents UR12 Touch Screen Remote Owner’s ManualInstallation GeneralCare of Equipment Repair of EquipmentCustomer Service Thank YouPlease Take a Moment Serial Number Purchase Date Dealer NameTable of Contents General NotesPerformance Features Introduction and Performance FeaturesIntroduction Installing Batteries Initial Start-up Touch Screen and Push-buttons How to Operate the Remote Control Touch Screen Menu Input Source SelectionMAC Touch Screen Pages Touch Screen Menu Tuner FunctionsHome EnterPower On and Off Speakers 1Mode Mono/StereoOverview Entering the System SettingsTouch Screen Contrast System Settings Clock SettingTouch Screen Alignment Systems and OptionsIntroduction Macro and Punch Through Programming M1, M2 and M3 ButtonsDevice Buttons Favorite Channel ButtonErase Function Punch through FunctionsUsing a three-digit code number PreprogramAuto Scan with Brand Names Main button to exit to the main menu Learning MethodButtons in the next page by press- ing the page button Erasing the Learned ButtonsDevice Touch-button, move the cursor to Device Button Edit Touch-buttons Press the Main button to exit to the main menuMoving Touch Buttons You desire, push the joystick down to save itCreating a Favorite Device Copy Touch ButtonsDelete Touch Buttons Select Insert button in Editing mode Inserting Touch-buttonsPress Change button in Editing Mode Changing Touch-buttonsEditing Touch-button Text Select Text Edit button in Edit# % & ‘ * + , . / 0 1 2 3 4 5 6 7 8 9 = ? @ Program Loading Setting the Date and ClockPort on the computer Erasing all the Programs When Cable Touch Screen Menu is selected Delete When LV Touch Screen Menu is selected CH UpSearch RandomAlternate Button Functions Manufacturer/Brand Set-Up Code Number Audio DevicesManufacturer/Brand Set-Up Code Number Auxiliary Devices Auxiliary Devices Manufacturer/Brand Set-Up Code Number Cable Devices Setup Code TableManufacturer/Brand Set-Up Code Number CD Devices CD Devices Manufacturer/Brand Set-Up Code Number DVD Devices Manufacturer/Brand Set-Up Code Number LV DevicesLV Devices Manufacturer/Brand Set-Up Code Number Tape Devices Manufacturer/Brand Set-Up Code Number SAT DevicesManufacturer/Brand Set-Up Code Number TV Devices TV Devices 197 003 024 056 059 060 063 064 164 VCR Devices Setup Code Table Specifications and Packing Instructions Packing InstructionsRemote Control Products ONE Year Limited Warranty Scope and Duration of Warranty What McIntosh will do under the WarrantyLimitations on McIntosh’s Obligations under the Warranty Geographical LimitationsParts and Occurrences that are not Covered by the Warranty What the Owner must Pay For