SC823 Chassis User’s Guide
2-2 Chassis Installation
A. Important Safety Guidelines
Stop | This product shall only be accessed, assembled and serviced |
| by technically qualified personnel or technicians. |
To avoid personal injury and property damage, please read all the information provided in Chapter 1, and carefully follow all the Safety Guidelines listed before accessing or servicing the SC823 or its components. For your convenience, some Safety Steps are also listed below.
Safety Steps
Before accessing the chassis:
1.Turn off all peripheral devices and turn off the power supply connected to the SC823.
2.Unplug all power cords from the system or the wall outlets.
3.Disconnect all the cables and label the cables for easy identification.
4.Use a grounded wrist strap designed to prevent static discharge when han- dling components.
Removing the chassis covers:
After completing the above steps, you can remove the chassis covers and install components and devices into the chassis as described in this chapter.
1.Press the tabs or the screws to loosen and remove the cover or the components from the chassis.
2.Save all the screws and fasteners for later use. (If necessary, label these screws or fasteners for easy identification.)
3.Follow the instructions given in this chapter to remove the chassis covers.
B. Tools needed
1.Phillips Screw Driver
2.Antistatic Strap