SUPER MICRO Computer SC823T manual Product Compliance Information, Product Safety

Page 8

SC823 Chassis User’s Guide

Before installing the chassis into a rack:

1.Make sure that the rack is securely anchored onto an unmovable surface or structure before installing the chassis into the rack.

2.Unplug the power cord(s) of the rack before installing the chassis into the rack.

3.Make sure that the system is adequately supported and that all the components are securely fastened to the chassis to prevent com- ponents from falling off from the chassis.

4.Be sure to install an AC Power Disconnect for the entire rack assembly and this Power Disconnect must be clearly marked.

5.The rack assembly shall be properly grounded to avoid electric shock.

6.The rack assembly must provide sufficient airflow to the chassis for proper cooling.

1-5 Product Compliance Information

The SC823 Chassis is compliant with the following safety standards/ requirements:

Product Safety

*Canada/USA--UL60 950-CSA60 950 *European Union--EN 60 950 *International--IEC 60 950

Electromagnetic Compatibility (EMC)-Emissions

*European Union--EN55022: 1994 *International--CISPR 22 *USA--Title 47 CFR, Part 15

Electromagnetic Compatibility-Immunity *European Union--EN55024: 1998 *International--CISPR 24

Power Line Harmonics/Voltage Flicker

*European Union--EN61000-3-2/EN61000-3-3

*International--IEC61000-3-2

1-8

Image 8
Contents Super SC823T/SC823S SC823iSC823 Chassis User’s Guide Table of Contents General Electrical Safety Guidelines Electrical Safety GuidelinesChecking the Power Cords General Safety Guidelines ESD Safety Guidelines Operation Safety GuidelinesRemoving the chassis covers Before accessing the chassisReinstalling the chassis covers Before installing the chassis into a rack Product SafetyProduct Compliance Information Electromagnetic Compatibility EMC-EmissionsPacking List and the SC823 Specifications SC823 SpecificationsSC823 Series chassis contains the following For the SC823-IDE Models-*823i-550LP/823i-R500RCFor the SC823-SATA Models-*823T-R550LP/823T-R500RC SC823 Power Supply SpecificationsFor the SC823-SCSI Models-*823S-R500LP/-R500RC/-R550LP Jumper Settings and Pin Definitions Serial ATA Back Panel *SC823T onlyJumper Locations JP25 JP18 JP26Scsi Back Panel *SC823S Only Chassis Description and Installation Instructions Chassis DescriptionFront Panel I/O Device Definitions * for the SC823i Series Chassis Front View and the Front Control PanelSC823T/SC823S Series LED Button Descriptions LED PanelLED and Button Definitions Back Panel Devices *P/N CSE-PT22 SC823 Chassis Rear View *SC823T/823i-RC ModelsBack Panel Devices *P/N CSE-PT21 Back Panel I/O Port Definitions Back Panel *installed on the back panel-SeeBack Panel Chassis Installation Important Safety GuidelinesSafety Steps Tools neededProcedures Removing the Top Cover of the SC823 ChassisSCA Sata Drives *SC823S/823T Series IDE Drives*SC823i Series Procedures Accessing Chassis Fans Procedures Installing the Air ShroudChassis Description and Installation Instructions Needed For Please use Type Installing the MotherboardPower Supply Procedures to Install Chassis Rails Installing Chassis RailsBefore installing the Chassis rails Page Rack Installation