SC823 Chassis User’s Guide
G. Installing the Motherboard
Be sure to disconnect the power supply before accessing or installing the motherboard into the chassis. To install the motherboard to the chassis, first, you will need to install the correct type of standoffs at the proper locations before installing the motherboard into the chassis. (Refer to Chapter 1 for Safety Guidelines.)
Procedures
1.Lay the chassis on a flat surface. Locate the mounting holes on the mother- board and locate the corresponding mounting holes on the chassis.
Power Supply
1
A
B
2.On the chassis, install standoffs in the mounting holes that are corresponding to the mounting holes on the motherboard.
3.Lay the motherboard on the standoffs and secure it to the chassis with the correct types of screws at proper locations.
4.Secure the CPU(s) and heatsink(s) to the motherboard and the chassis as
needed. |
| B |
| A |
|
|
| ||
(For | , please use Type | . For | , please use Type | .) |
Warning: For proper cooling, please make sure that all the
!chassis covers are installed before you operate the system. Out of warranty damage can occur if this rule is not strictly followed.