SUPER MICRO Computer SC823T manual General Safety Guidelines

Chapter 1: Safety Information and Technical Specifications

Use rubber mats specifically designed as electrical insulators when working with computer systems.

The power supply or power cord must include a grounding plug and must be plugged into grounded outlets.

Motherboard Battery: CAUTION -Make sure not to install the onboard battery upside down to avoid possible explosion. Make sure that the positive side should be facing up on the motherboard. This battery must be replaced only with the same or an equivalent type recommended by the manufac- turer. Dispose of used batteries according to the manufacturer's instruc- tions.

CD-ROM Laser: CAUTION - Do not open the enclosures of power supplies or CD ROM to avoid injury.

1-2 General Safety Guidelines

Warning: Follow these rules to ensure general safety:

Keep the area around the SC823 chassis clean and free of clutter.

To avoid injuries to the back, be sure to use your leg muscles, keep your back straight, and bend your knees, when lifting the system.

After removing the components or chassis covers from the system, place them on a table for safeguard.

Avoid wearing loose clothing to preventing it from coming into contact with

Be sure to remove any jewelry or metal objects before working on the chassis to avoid short circuits should these objects come into contact with power circuits.

After accessing the interior of the chassis, be sure to close the chassis with chassis covers and secure the chassis to the racks with screws.

1-5