Vizio VT470M user manual

VlZIO VT420M/VT470M User Manual

,

,

If your Time Zone observes the daylight savings, the next display will give the choice to select or no select it. Highlight your choice and press MENU/SELECT button to confirm your selection.

At this point if you have an outdoor antenna or use a cable service (No set-top box), the signal source can be selected.

Press • or • to select your input source

(Antenna or Cable), then press MENU/SELECT button to confirm it. The

scanning of the channels will start.

NOTE: Select Cable only if you receive your cane service without a set.4op box°

The Channel Scan progress screen opens if you selected Scan. At this point if you are using a cable or satellite set-top box, please press MENU/SELECT button to exit this

process and use your cable box to select the channels.

Note: If you select Stop Scan, you can scan channels at a later time by selecting Channels menu, and then and select the Scan Channels option in the menu.

10.If you let the TV finishing the channel scan, the next screen will give the option to continue.

11.At this point, you can either let the TV do the final two steps automatically or press the MENU/SELECT key to continue and finish this procedure.

Note: DTV digital broadcast is not available in all areas. Refer to www.antennaweb.orq to get information about availability in your area, antenna types, and in which direction to point your antenna. The channel availability through cable depends on which channels your cable operator supplies in Clear QAM. Consult your cable operator for more information.

32

www.VlZlO.com