@hap&÷r 2 ¢onn÷c&ing Equipm÷n | Vizio VT470M instruction

Vizio VT470M user manual @hap&÷r 2 ¢onn÷c&ing Equipm÷n

VlZIOVT420M/VT470MUserManual

@hap&÷r 2 ¢onn÷c&ing Equipm÷n&

Your HDTV has six different ways to connect your video equipment from a basic connection to the most advanced for digital signals.

Best (digital)

Good

(analog)

Best (analog)

Better (analog)

Good (analog)

Best

(digital)

Green

Blue

Yellow

Red

White

HDMI (High-Definition Multimedia Interface). It is the first and only industry-supported, uncompressed, all-digital audio/video interface. HDMI provides an interface between any audio/video source, such as a set-top box, DVD player, or A/V receiver and an audio and/or video monitor, such as a digital television (DTV), over a single cable.

DTV Coaxial RF. When used for MPEG2 encoded bit streams from ATSC broadcast programming, this input takes advantage of the High Definition content.

TV Coaxial RF. This is the connection for standard NTSC TV using antenna or cable.

RGB PC (VGA). This video input has separate red, green and

blue color components. The signal carries horizontal and vertical sync information on the green signal. This is most commonly used for PC input.

Component. The video signal is separated into three signals, one containing the black-and-white information and the other two containing the color information. This enhancement over S- Video takes advantage of the superior picture provided by progressive scan DVD players and HDTV formats.

S-Video.The video signal is separated into two signals, one containing the black-and-white information and the other containing the color information. Separating the color in this way avoids 'cross color'effects where closely spaced black and white lines are erroneously displayed in color. It also enables text to be displayed more sharply.

Composite. The complete video signal is carried through this

single pin connector. This is the most commonly used video connection.

USB (Universal Serial Bus). USB is an interface port designed to connect storage devices holding data (FAT32 format: MP3 for music and JPEG for image) files without a need to power off the host (TV) unit.

Note: For more information, please refer to the Quick Start Guide