INSTALLER GUIDE
Configuring Sources
For proper operation, Russound components must be assigned the correct Source Type in the
Russound Component | Source Type |
ST2 Tuner | Russsound Tuner |
| Satellite Radio |
SMS3 Media Server | SMS3 Media Server |
After sources have been configured and given custom names (if applicable) in the CAV6.6 or CAM6.6 system, they must also be configured in the
1.The
2.Press the “Options” button on the home screen.
3.Press the “Screen Set Up” button on the Options screen.
4.Press and hold (for 3 or more seconds) the “Installers Setup” button on the Screen Setup screen.
Options
5.Press the “Source Setup” button on the Installer Setup screen.
6.Press the “Source 1” button. When entering the Source Setup menu for the first time after a controller has been programmed, the Source Name may take a few seconds to appear cor- rectly in the Source Setup screen display. Simply wait a few seconds and the correct Source Name will appear.
7.Press the left/right arrows next to the source type field on the screen until the proper source type name appears. This type must match the source connected to source 1 on the controller. The Name field is automatically configured from the controller.
8.Press the “back” button.
9.Repeat the last 3 steps for up to 5 more sources.
10.Press the “home” button.
11.Confirm that all configured sources appear on the main screen buttons.
12.Press each of the source buttons and con- firm that the correct screen is loaded.
Screen Setup
Options button | Screen Setup button | Installers Setup button | ||
|
|
|
|
|
Installers Setup | Source Setup | Source 1 Setup | ||
|
| CD | ||
|
| CD Changer | ||
Source Setup button | Source # button |
| ||
Source |
| type | ||
| ||||
22