Russound UNO-TS2 manual Other Installer Setup Functions

Several installer-level functions are accessible from the Installers Setup screen.

About - This screen shows the current firmware and screen versions on this touchscreen.

Zone and Controller ID - On this screen, enter the touchscreen’s zone number the UNO-TS2 is

INSTALLER GUIDE

Other Installer Setup Functions

controlling and the ID number of the controller to which it is connected.

Note: The controller must be power cycled after the Zone Number and/or Controller ID is changed on the UNO-TS2

About this keypadZone and Controller IDs

Firmware Version: X.XX	6
Screens Version: X.XX.XX	1

This screen is shown when “About” is selected

This screen is shown when “Zone and Controller ID” is selected

Factory Init - This screen allows a factory initialization to be performed on the touchscreen. This sets the unit back to its factory settings.

Factory Init	Factory Init
Are you sure?	Factory Init complete

This will Factory Init the touch-screen only

This screen is shown when “Factory Init” is selected

This screen is shown when the Factory Initialization is complete

23