Toshiba SD-P5000 manual M. Dvd-V Vcd Cd, Pcm

58 59

AUDIO MENU

	»
E.A.M.
		Normal
D.R.C.		3D
Audio Out Select		3D (Headphone)
		Dialog
Setup Menu

E.A.M. DVD-V VCD CD

You can obtain expansive virtual surround sound effects from just two speakers.

Normal: Normal sound.

3D: To obtain expansive virtual surround sound

effects from just two speakers.

3D (Headphone):

To obtain expansive virtual surround sound effects when using headphone.

Dialog: To control critical center channel information to make dialogue more intelligible (only when playing a DVD video disc recorded on the Dolby Digital recording system).

•To use this enhancement on sounds output from the BITSTREAM/PCM jack, be sure to set “Audio Out Select” to “PCM.”

Note

Pressing the E.A.M. button on the remote control also allows you to achieve the same setup. 53

D.R.C. DVD-V

Turn on or off a function that makes faint sounds easier to hear even if you lower the volume during late hours playback.

D.R.C. = Dynamic Range Control

ON : Dynamic range is reduced.

OFF : Full dynamic range is maintained.

Notes

•This function works only during playback of Dolby Digital recorded discs.

•The level of Dynamic Range Reduction may differ depending on the DVD disc.

Audio Out Select DVD-V VCD CD

Select the output sound format corresponding to your system connection.

For details of sound recording systems, see 41 .

Bitstream: Select when connected to an amplifier equipped with a Dolby Digital, DTS, MPEG1 or MPEG2 decoder. The unit outputs digital audio information in the bitstream format when you play a DVD video disc recorded in the Dolby Digital, DTS, MPEG1 or MPEG2 recording system.

Analog 2ch: Select when connected to a TV, or

	Dolby Pro Logic or stereo system via
	the analog audio jacks. 54 58
PCM:	Select when connected to a 2 channel
	digital stereo amplifier. 60
	The unit outputs sounds in the PCM
	2ch format when you play a DVD video
	disc recorded on the Dolby Digital,
	MPEG1 or MPEG2 recording system.

Function setup

65