Toshiba SD-6100KU manual Set Password DVD, Use Default Settings, DivX Registration, Screen Saver

Set Password DVD

New Password can be set to replace the default password.

1)	Press SETUP button.
2)	Press	/ button to select Rating.
3)	Press	button, then use the / button to select Set

Password.

4)Press ENTER button. “Enter Password” screen will appear.

5)Press the number buttons to input the current password (If the password has not been set yet after you purchase this unit, it is “8888”). Then press

ENTER.

6)Press ENTER button again, “New Password” screen will appear. Press the number buttons to input the new password.

7)Press ENTER button. Now your new password has been set. Be sure to remember this number!

If you forget the password, you can erase your current password by pressing number button 8 on the remote control four times, then press ENTER button to confirm the setting.

PASSWORD: 8888

Misc

Screen saver	: On
HDMI Control	: On

Use Default Settings

If you want to return the initial language setting such as Language, Video, Audio and etc. to the factory default, do the following:

1)	Press SETUP button.
2)	Press	/ button to select Misc.
3)	Press	button to select Use Default Settings, then
	press ENTER button.
4)	Press	/
	button to select
	“Yes”, then press
	ENTER button.		Screen saver	: On
	The	original
	setting	will be	Do you want to use default setting?

restored.

5)Press SETUP button to exit the menu.

Note

When you reset the DVD player to the factory default, the DVD player will take 3-5 seconds to reset.

DivX® Registration

Some DivX® Video-On-Demand files required registration code, please get the code of your DVD player as follow:

1)	Press SETUP button.
2)	Press	/ button to select Misc.
3)	Press	button, then use the / button to select

DivX Registration.

4)Press ENTER button, your registration code will be shown.

5)Press ENTER button.

6)Press SETUP button to exit the menu.

Screen saver : On

DivX R Video On Demand

Your registration code is :

Note

This registration code is for DivX® Video-On-Demand only. Do not apply this code for other applications or websites.

Screen Saver

To turn on or off the screen saver (screen protection to prevent image burn).

1)	Press SETUP button.
2)	Press	/ button to select Misc.
3)	Press	button, then use the /	button to select
	Screen saver.
4)	Press ENTER button, then use the		/ button to
	select the On or Off mode.

6) Press SETUP button to exit the menu.

Screen saver	Off
HDMI Control	On: Off

Note

When you leave the unit in DVD stop mode for approximately 5 minutes, the screen saver of the DVD player automatically appears if you set the Screen saver to On mode.To turn off the screen saver, press the PLAY button.

Function setup

33