5.10Ring from Headset

When this function is enabled, ring sound will be passed to a connected headset. Press Menu ->Features-> Enter-> Headset Ring -> Enter.

5.11Power Light

This feature enables the power light at the bottom of the phone.

Press Menu ->Features-> Enter->Power LED-> Enter.

5.12Hide DTMF

This feature sets how DTMF digits are displayed after a call is in progress. For example, dialing a PIN code to access banking information.

1.Press Menu ->Features-> Enter->Hide DTMF-> Enter.

2.Use LEFT ARROW or RIGHT ARROW to select one of the following 4 choices.

a)Disabled – All the digits will be shown on the LCD.

b)All – None of the digits will be shown on the LCD. The “*” will be shown.

c)Delay – The last digit entered will be shown for a short time and then replaced by

“*.”

d)Last Show – The last digit entered will be shown. Previous digits are replaced by

“*.”

5.13Password Dial

This feature controls the display of dialed digits. When enabled, a password and length can be set.

Example: A call is placed to 6625551212. Password is set to 662 and length is set to 3. Display will show 662***1212.

1.Press Menu ->Features-> Enter->Passwd Dial-> Enter.

2.Use LEFT ARROW or RIGHT ARROW to enable the feature.

3.Use UP ARROW or DOWN ARROW to move to Prefix.

4.Use keypad to enter prefix.

5.Use UP ARROW or DOWN ARROW to move to Length.

6.Use keypad to enter Length.

7.Use BACK or EXIT to return to idle screen.

5.14Pre Dial

If this feature is enabled, digits dialed on-hook will be transmitted when the phone goes off-hook

Press Menu ->Features-> Pre Dial-> Enter.

23

Page 23
Image 23
Cortelco C60 user manual Ring from Headset, Power Light, Hide Dtmf, Password Dial, Pre Dial