PnP Port | PnP Server Port |
|
|
PnP Transport | PnP Transfer protocol – UDP or TCP |
|
|
PnP Interval | Interval time for querying PnP server. Default is 1 hour. |
|
|
Phone Flash Settings
Server Address | Set FTP/TFTP/HTTP server IP address for auto update. The address | ||
| can be an IP address or Domain name with subdirectory. | ||
|
| ||
Protocol Type | Specify the Protocol type FTP, TFTP or HTTP. | ||
|
|
| |
Config File Name | Specify configuration file name. | The phone will use its MAC ID | |
| as the config file name if this is blank. | ||
|
|
| |
Update Interval | Specify the update interval time. | Default is 1 hour. | |
|
|
|
|
Update Mode | 1. | Disable – no update |
|
| 2. | Update after reboot – update only after reboot. | |
| 3. | Update at time interval – update at periodic update interval | |
|
|
|
|
| TR069 Settings |
Enable TR069 | Enable/Disable TR069 configuration |
|
|
ACS Server Type | Select Common or CTC ACS Server Type. |
|
|
ACS Server URL | ACS Server URL. |
|
|
ACS User | User name for ACS. |
|
|
ACS Password | ACS Password. |
|
|
TR069 Auto Login | Enable/Disable TR069 Auto Login. |
|
|
"Inform" Sending Period | Time between transmissions of “Inform” Unit is seconds. |
|
|
8.3.6.2Syslog
Syslog is a protocol used to record log messages using a client/server mechanism. The Syslog server receives the messages from clients, and classifies them based on priority and type. Then these messages will be written into a log by rules which the administrator has configured. There are 8 levels of debug information.
68
