Telnet with CLI command

8.1.2Password Configuration

There are two levels of access: root level and general level. A user with root level access can browse and set all configuration parameters, while a user with general level can set all configuration parameters except server parameters for SIP or IAX2.

Default user with general level:

Username: guest

Password: guest

Default user with root level:

Username: admin

Password: admin

The default password for the phone screen menu is 123.

8.2Setting via web browser

Enter the phone’s IP address into the address bar of the web browser. This assumes that the pc and the phone are on the same subnet. Note: Internet Explorer, Firefox, Chrome, or Safari are supported browsers.

If the IP address is not known, it can be displayed on the phone’s LCD by pressing the Menu->Status.

After entering the IP address, the following screen is displayed.

After configuring the IP phone, remember to click SAVE under the Maintenance tab. If this is not done, the phone will lose the modifications when it is rebooted.

28

Page 28
Image 28
Cortelco C60 user manual Setting via web browser, Password Configuration