Setting up your TV
Adding channels to the TV’s memory
When you press CH +/- on the remote control or CHANNEL ▼/▲ on the TV front panel, your TV will stop only on the channels stored in the TV’s channel memory. Follow the steps below to program channels into the memory.
Programming channels automatically
Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory auto- matically, you can add or erase specific channels manually.
To add channels automatically:
1.Press MENU, then press 
or 
to display the SETUP menu.
2.Press ▲ or ▼ until the TV/CABLE selection is highlighted.
3. Press or to highlight either | CH | |
PICTURE AUDIO SETUP OPTION | ||
TV or CABLE, depending on | ||
|
which you use. | TV / CABLE | TV | CABLE |
|
| ||
| CH PROGRAM | START | |
If you use an antenna, choose TV. | ADD / ERASE | ADD | |
|
|
| |
If you use cable, choose CABLE. | SELECT | ADJUST | |
| |||
4.Press ▼ to select CH PROGRAM.
5.Press 
or 
to start channel programming. The TV will automati- cally cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory.
While the TV is cycling through the channels, the message “PROGRAMMING
6.When channel programming is complete, the message “COMPLETED” appears.
7.Press CH + or – to view the programmed channels.
Adding and erasing channels manually
After you have programmed the channels automatically, you can add or erase specific channels manually.
To add or erase channels manually:
1.Select the channel you want to add or erase.
If you are adding a channel, you must select the channel using the
| Channel Number buttons. |
|
|
|
|
|
|
|
|
|
|
|
|
| ||
2. | Press MENU, then press or |
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| CH |
|
|
| |||||
| to display the SETUP menu. | PICTURE | AUDIO | SETUP | OPTION |
| ||||||||||
3. | Press ▲ or ▼ to highlight ADD/ |
| ||||||||||||||
TV / CABLE |
| CABLE | ||||||||||||||
| ERASE. |
|
|
| ||||||||||||
|
|
| CH PROGRAM |
| START | |||||||||||
4. | Press | or to select ADD or |
|
| ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| ADD / ERASE |
| ADD | ERASE | ||||||||||||
|
|
|
|
| ||||||||||||
ERASE, whichever function you want to perform.
5.Repeat steps
Changing channels
To change to the next programmed channel:
Press CHANNEL ▼/▲ on the TV front panel or CH +/– on the remote control.
To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons
For example, to select channel 125, press 100, 2, 5.
16
POWER | TV | VCR | CABLE |
|
|
| |||
|
|
| DVD |
|
1 | 2 | 3 |
|
|
|
|
| +10 |
|
4 | 5 | 6 | 100 | Channel |
|
|
|
| |
7 | 8 | 9 | 0 | Numbers |
| CH + |
| Channel +/– | |
|
|
|
| |
VOL | MENU/ | VOL |
| |
– | + |
| ||
ENTER |
| |||
|
| Menu | ||
|
|
|
| |
| CH – |
|
| |
EXIT | RECALL | TV/VIDEO | FAV |
|
VOL | CH RTN | FAV |
| |
RESET | CAP/TEXT | 1/2 | 16:9 |
|
DISPLAY | DVD CLEAR | TOP MENU | DVD MENU |
|
CODE | MTS | SLEEP | MUTE |
|
16 | 18/01/2005, 3:40 AM |