Toshiba 15DLV76 owner manual Connecting to an optional equipment with S-video output, Playback

Left side (LINE 2 IN)

Connecting to an optional equipment with S-video output

If you connect a VCR with an S-VIDEO cable to the S-VIDEO IN jack on the left side of the TV/DVD, you must also connect the audio cables to the AUDIO IN (LINE 2 IN) jacks on the left side of the TV/DVD. The S-VIDEO cable only carries the video signal. The audio signal is separate.

Select the “VIDEO2” by pressing INPUT SELECT repeatedly.

		(red)
: Signal flow		(white)
	Ex. VCR with S-Video	To AUDIO (L/R) IN
		(playback)
To S-VIDEO OUT	To Audio (L/R) OUT
		To S-VIDEO IN
		Audio cable (not supplied)
	S-Video cable (not supplied)

Note: When the S-VIDEO cable and the standard video cable are connected at the same time, the S-video cable takes precedence.

Connecting an optional equipment with ColorStream® (Component video) output

Your TV/DVD is capable of using ColorStream® (component video). Connecting your TV/DVD to a component video compatible DVD player, such as a Toshiba DVD player with ColorStream® can greatly enhance picture quality and performance.

Ex. DVD player with Component video Rear lower right of the TV

Connections

: Signal flow

To Component

Video OUT

To AUDIO (L/R) IN

To Audio OUT

Audio cable (not supplied)

Component video cable (not supplied)

To COMPONENT (Y, PB, PR) IN

■Selecting Component input mode Press INPUT SELECT repeatedly to select “ColorStream” mode.

ColorStream

When using the Component video cable, an Audio cable must be connected to AUDIO IN (L/R) (LINE 1 IN) jacks.

The ColorStream® inputs on this unit are for use with devices that output 480i interlaced signals and 480p progressive signals. This unit will not accept or display 720p progressive scan signals or 1080i interlaced high-definition signals. If you connect a high- definition set-top receiver, 720p progressive scan DVD player, or other similar device to the unit’s ColorStream® inputs, YOU MUST SWITCH THE DEVICE’S OUTPUT TO 480i INTERLACED OR 480p PROGRESSIVE MODE FIRST. Failure to do this will cause a poor or no picture to display.

Notes:

•Refer to the owner’s manual of the connected equipment as well.

•When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.

•If you place the unit near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the unit away from the tuner and radio.

17

J5X00221A [E] (P14-25) 17 21/02/2006, 8:39 PM