TV operation
TV operation (Continued)
SLEEP
RECALL CH RTN MUTE
VOL +/–
GAME CH +/–
TV operation
■CHANNEL UP/DOWN
Press and release CH + or
For proper operation, before selecting channels, they should be set into the memory. See page 22 “To memorize channels”.
ANT
12
■RECALL
Press RECALL to display the current informations on the screen. Press RECALL again to clear the display.
•Channel number or external input mode
•Stereo or SAP (Second Audio Program) audio status
STEREO
SAP
ANT
TV 12
■CH RETURN
This button allows you to go back to the last channel selected by pressing CH RTN. Press CH RTN again to return to the last channel you were watching.
ANT
7
■MUTE
Press MUTE to switch off the sound. The TV/DVD’s sound will be silenced and “MUTE” will appear briefly on the screen. The sound can be switched back on by pressing this button again or one of VOL
■SLEEP
To set the TV/DVD to turn off after a preset amount of time, press SLEEP on the remote control. The clock will count up 10 minutes for each press of SLEEP (0h00m, 0h10m,... 1h50m, 2h00m). After the sleep time is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating. To confirm the sleep timer setting, press SLEEP and the remaining time will be displayed for a few seconds. To cancel the sleep timer, press SLEEP repeatedly until the display turns to 0h00m.
SLEEP
0h00m
■GAME MODE
After connecting a TV Game to the unit (see page 16), press GAME. The TV screen changes to the Game mode.
GAME
•The Game mode screen is adjusted to the suitable brightness for your eyes.
•If GAME is pressed during standby mode, the unit turns on automatically and the Game mode screen appears on the screen.
•Interactive video games that involve shooting a “gun” type of
■HEADPHONES
Insert a stereo headphones (not supplied) with a 1/8” mini plug into the PHONES jack on the front panel. If you connect headphones, the sound from TV speakers is muted.
MUTE
24
J5X00221A [E] | 24 | 21/02/2006, 8:39 PM |