Toshiba 15DLV76 To obtain a higher quality picture, About, To pause playback still mode

Basic playback

Playing a disc (Continued)

To obtain a higher quality picture

Occasionally, some picture noise may appear on the TV screen while playing a DVD video disc because the high resolution pictures on these discs include a lot of information. In such case, you may reduce the SHARPNESS with the Picture control adjustment menu (see page 28).

About		DVD	VCD	CD
The	DVD	VCD	CD	icons on the heading bar show the playable discs for the
function described under that heading.
	: You can use this function with DVD video discs.
VCD	: You can use this function with Video CDs.
CD	: You can use this function with Audio CDs and CD-R/RW CDs.

DVD

VCDCD Basic playback

To pause playback (still mode)

Press PAUSE during playback. To remove the disc

POWER

TV/DVD EJECT

VOL +/–

ENTER

// /

PAUSE

PLAY

STOP

To resume normal playback, press	Press EJECT.
PLAY.

•The sound is muted during still mode.

Remove the disc after the disc comes out.

To stop playback

Press STOP.

Notes:

•If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the TV screen according to the type of loaded disc. In this case, check your disc again (see pages 8 and 50).

•Some discs may take a minute or so to start playback.

•When you set a single-faced disc label downwards (ie. the wrong way up), “Reading” will appear on the display for a few minutes and then “Incorrect Disc” will continue to be displayed.

•Some discs may not work the resuming facility.

•Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 39.

•Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the DVDs.

•Do not move the unit during playback. Doing so may damage the disc.

•Use the EJECT button to unload and eject the disc.

•Do not put any objects other than discs on the disc slot. Doing so may cause the unit to malfunctions.

•There may be a slight delay between the button is pressed and the function activates.

32

J5X00221A [E] (P31-35) 32 21/02/2006, 8:41 PM