Getting started
Programming channels into the TV’s channel memory
•First, use the Auto tuning function to preset all the active channels in your area automatically. Then, arrange the preset channels with the Manual tuning function so that you can tune into only desired channels.
•Use the Manual tuning operation if desired channels cannot be preset with the Auto tuning or if you would like to preset channels to specific position numbers one by one.
Programming channels automatically
1From the SET UP menu, press u or U to select Auto tuning.
2Press Q to display the Auto tuning menu.
Auto tuning
!Press OK key to start. EXIT for no change .
MENU Back EXIT Watch TV
3Press Q to start the automatic search.
The search will begin for all available stations.
Auto tuning
Searching
Pos :2
EXIT Stop
The slide bar will move along the line as the search progresses.
If you make a mistake, simply repeat steps
4When the automatic search is completed, the TV will automatically return to the first program position.
5Press PB or Pb to view the programmed position.
Note:
When you preset the program channel which sound of broadcast transmission system adopts “M” system, the sound system may not be tuned correctly if the radio waves transmit badly. At that time, preset the channel by Manual tuning.
The countries such as Myanmar, Brazil, Chile, Colombia apply to this case. See page 33 for more details.
Manually setting channels in the channel memory
1From the SET UP menu, press u or U to select Manual tuning.
2Press Q to display the Manual tuning menu. Press u or U to select the program position you want to arrange.
|
|
| Manual tuning | |
Prog. | Label | |||
1 |
|
|
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
3 |
|
|
|
|
|
|
|
|
|
4 |
|
|
|
|
|
|
|
|
|
5 |
|
|
|
|
|
|
|
|
|
6 |
|
|
|
|
|
|
|
|
|
OK Select | Sort | |||
MENU Back | EXIT Watch TV | |||
3Press Q to display the breakdown menu. Press I or i to select an item, then press u or U to select the item as shown below.
Manual tuning
Program
1 
B/G
A 
OK | Store |
|
|
MENU Back | EXIT Watch TV |
| |
A | C | E | G |
B D F
A. Program position selection
B. Sound system (- page 33)
C. Color system (- page 33)
A : Automatic (factory set), P : PAL,
S : SECAM, N4 : NTSC 4.43 (MHz),
N3 : NTSC 3.58 (MHz)
If the color of a certain channel is abnormal, the automatic color system selection (A) may have malfunctioned, or sound system selection is wrong. In such a case, select another color and/or sound system (- page 33).
D. Program position skip selection Press u or U to turn the program position skip option on “8” or off “(”.
The program position will then be skipped when you select channels with PB or Pb. The “8” mark will appear beside a program position number when you use the Number button on the remote control.
E. Channel search operation
Press U to search up the band or u to search down the band.
Press u or U repeatedly until your desired channel is displayed.
When a station/satellite is found, it will be displayed.
NEVER PRESS ANY OTHER BUTTONS WHILE THE SET IS TUNING.
14