Using the TV’s features
1From the Picture settings menu, press u or U to select MPEG NR on the 2nd page.
2Press I or i to select Off, Low, Middle or High.
MPEG NR | Low |
|
Note:
In the PC input mode (- page 23), this mode is not available.
Activating the DNR (Digital Noise Reduction)
If the receiving signal is weak and the picture is blurry, the picture may be improved when using this function.
1From the Picture settings menu, press u or U to select DNR on the 2nd page.
2Press I or i to select Auto, Off, Low, Middle or High.
DNR | Auto |
|
Note:
This function is available for 480i and 576i signals.
Selecting the color temperature
You can change the tone of the picture by selecting from three preset color temperatures: Cool, Normal or Warm.
1From the Picture settings menu, press u or U to select Color Temperature on the 2nd page.
2Press I or i to select mode you prefer.
| Color Temperature | Cool |
|
|
Cool | : Lends a blue hue to the picture. | |||
Normal | : Neutral |
|
|
|
Warm | : Lends a red hue to the picture. | |||
Adjusting the color management
You can adjust the picture color quality by selecting from 6 base color adjustments : Red, Green, Blue, Yellow, Magenta or Cyan.
1From the PICTURE menu, press u or U to select 3D Color management.
2Press I or i, then press I or i to select On.
3D Color management | On |
|
3Press Q, then press u or U to select Base color adjustment.
4Press Q, then press u or U to select an item you want to adjust.
Base color adjustment
|
| Hue | Saturation | Brightness |
| Red | 0 | 0 | 0 |
|
|
|
|
|
| Green | 0 | 0 | 0 |
|
|
|
|
|
| Blue | 0 | 0 | 0 |
|
|
|
|
|
| Yellow | 0 | 0 | 0 |
|
|
|
|
|
| Magenta | 0 | 0 | 0 |
|
|
|
|
|
|
|
|
|
|
| Cyan | 0 | 0 | 0 |
|
|
|
|
|
Reset |
|
| OK | |
|
|
|
|
|
MENU Back | EXIT Watch TV |
| ||
5Press i, then press I or i to select Hue, Saturation or Brightness.
|
| Hue | Saturation | Brightness | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| Red | 0 | 0 |
| 0 |
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6Press u or U to adjust the settings as required.
Notes:
•If you select color management Off mode, this mode is not available.
•In the PC input mode (- page 23), this mode is not available.
Resetting the base color adjustment
The Reset function adjusts the base color adjustment to the factory settings.
1From the Base color adjustment menu, press u or U to select Reset.
2Press Q.
Using the active backlight control
In order to improve screen visibility, the active backlight control sets the screen brightness automatically during dark scenes.
1From the PICTURE menu, press u or U to select Active Backlight Control.
2Press I or i to select On or Off.
Using the cinema mode
A movie film’s picture runs at 24 frames a second, whereas movie software such as DVD, etc., that you enjoy watching on television at home runs at 30 (NTSC) or 25 (PAL) frames a second. To convert this signal to reproduce a smooth motion and picture quality, select the On mode.
19