Using the TV’s features
PC
Use this setting for PC via HDMI. When receiving 1080p, 1080i or 720p signal format of HDMI input, this picture size is available.
Notes:
•In the antenna input signal mode, the picture size selections are Wide, Super Live 2, Cinema 2, 4:3, Super Live 1, Cinema 1, Subtitle and 14:9.
•In the PC input mode (- page 23), the picture size selection is wide or normal only.
•Using the special functions to change the size of the displayed image (e.g. changing the height/width ratio) for the purpose of public display or commercial gain may infringe on copyright laws.
•If the aspect ratio of the selected format is different from the one of the TV transmission or video program, it can cause a difference in vision. Change to the correct aspect ratio picture size.
•When using the PC mode, the moving image quality may be deteriorated.
Using the picture still
• Press r to freeze the picture.
Even if an image is frozen on the TV screen, the pictures are running on the input source. Audio continues to be output as well.
To return to a moving picture, press r again.
(Moving) 
(Still)
Notes:
•If you use this function except for the purpose of your private viewing and listening, it may infringe the copyright protected by the copyright laws.
•In the PC input mode (- page 23), this function is not available.
Adjusting the picture position
Adjustment to the position of the picture may be made to suit your viewing preferences.
1Press M, then press I or i to display the SET UP menu.
SET UP |
|
| |
|
|
|
|
Language |
| English |
|
Auto tuning | OK | ||
|
|
|
|
Manual tuning | OK | ||
|
|
|
|
AV connection | OK | ||
|
|
|
|
Picture position | OK | ||
|
|
|
|
MENU Back EXIT Watch TV |
|
| |
2Press u or U to select Picture position.
3Press Q, then press u or U to select an item you want to adjust.
Picture position
Horizontal position | 0 |
|
|
|
|
Ver tical position | 0 |
|
Reset | OK | |
MENU Back EXIT Watch TV
4Press I or i to adjust the settings as required.
Horizontal position | 0 | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Notes:
•When the picture size is in Wide or 4:3 mode, only the Horizontal position can be adjusted.
•When the picture size is in PC mode, the picture position cannot be adjusted.
Resetting the picture position
This function resets your picture position settings to the factory settings.
1From the Picture position menu, press u or U to select Reset.
2Press Q.
17