Toshiba 42A3500T, 32A3500A, 32A3500E Using List mode, Teletext buttons on the remote control

Page 25

Using the TV’s features

given subject, simply press the relevant colored button on the remote control.

If FASTEXT is not available, you can access any page simply by entering a 3-digit page number or pressing the corresponding colored button.

For further information on your particular text system(s), see the broadcast teletext index page or consult your local Toshiba dealer.

Using LIST mode

1Press E to access teletext.

100 TEXT M00 14:58:55

100 200 300 400

Red Green Yellow Blue

The four choices at the bottom of the screen are now number – 100, 200, 300 and 400, which have been programmed into the TV’s memory.

2To view these pages, use the colored prompt buttons.

e.g. press the Green button to view page 200.

3If you want to change these stored pages, press the colored button for the color you want to change.

e.g. Press the Green button and enter the 3-digit number.

100 TEXT M00 14:58:59

100 250 300 400

This number will change in the top left of the screen and in the colored highlight.

4Press Q to store your choice. The bars at the bottom of the screen will flash white.

5You may view other pages by simply entering

the 3-digit page number – but NEVER press Q or you will lose the favorite already stored.

Teletext buttons on the remote control

Below is an introduction to the teletext buttons on your remote control and their functions.

E To display a page of teletext:

Press E to display teletext. Press again to superimpose the teletext over a normal broadcast picture. Press again to return to normal TV mode.

k To display an index/initial page:

In Auto-mode

Press k to access the index page. The one displayed is dependant on the broadcaster.

In LIST-mode

Press k to return to the 100 page or initial page.

A To reveal concealed text:

Some pages cover topics such as quizzes and jokes. To discover the solutions, press A.

B To hold a wanted page:

This function is included as it is part of the broadcast teletext system but you will not need it as this TV allows you to control the display of sub-pages.

C To enlarge the teletext display size:

Press C once to enlarge the top half of the page, press again to enlarge the bottom half of the page. Press again to revert to the normal size.

D To select a page while viewing a normal picture:

When in teletext mode, if a page selection is made and then D is pressed, a normal picture will be displayed. The TV will indicate when the page is present by displaying the title bar of the text page at the top of the screen. Press E to view the page.

Note:

It will not be possible to change program position while in Teletext mode, you will have to cancel the teletext first by pressing E to return to a normal TV picture.

To select the time display:

If you press D while watching a normal TV broadcast, you will see a time display from the broadcaster. It will remain on the screen for about 5 seconds.

9:56 and 25 seconds p.m.

21:56:25

Note:

If you press r while this mode is activated, this mode will be cancelled.

25

Image 25
Contents LCD Color TV Contents Installation Important Safety InstructionsWelcome to Toshiba Side view Precautions for moving the TVNever place the TV near a heater or in direct sunlight Use Precautions for installing on outdoor antennaNever stand or climb on the TV Never repair, modify or disassemble the TV by yourself ServiceImportant information CleaningExemptions Installing the remote control batteries Connecting an antennaExploring your new TV Effective rangeTV top view TV front view TV top, front and side panel controlsTV back view TV back panel connectionsPC/HDMI1 Audio input terminals Location of controls Learning about the remote controlSwitching off the TV Switching on the TV Displaying the menu chartTurning the TV on Learning about the menu systemSelecting the menu language Watching TV programsChanging the program position Displaying the on-screen informationProgramming channels into the TV’s channel memory Manually setting channels in the channel memoryProgramming channels automatically Program position selection Sound system Color systemManual Fine Tuning Auto Fine TuningSorting program position LabelSelecting the picture size Picture adjustmentAdjusting the picture position Using the picture stillResetting the picture position Adjusting the basic picture quality Selecting the picture modeMode Picture quality Activating the black stretchAdjusting the color management Selecting the color temperatureResetting the base color adjustment Using the active backlight controlSelecting the dual 1 or dual 2 mode Sound adjustmentAdjusting the sound quality Selecting the stereo programsUsing the SRS WOW surround sound Using the bass boostUsing the stable sound Selecting the timer menu Other features settingsUsing the auto format Adjusting the brightness of side panelSelecting the video input source to view Setting the manual setting menuUsing Auto mode Setting up the teletext modeTeletext Teletext general informationTeletext buttons on the remote control Using List modeBack connections Side connectionsConnection example Connection exampleConnecting a DVI device Connecting an Hdmi deviceConnecting an Hdmi or a DVI device Hdmi type a connector-to-DVI adapter cableWhen the sound is not audible Setting the HDMI1 audio modeFollowing signals can be displayed Connecting a computerSignal names for mini D-sub 15 pin connector Pin No Signal nameAdjusting the picture size/position Using the PC settingTo connect a PC to the Hdmi terminal on the TV Adjusting the sampling clock Adjusting the clock phase of the pictureResetting the PC setting Symptom and solution TroubleshootingBroadcast transmission systems of each country or region Broadcast systemLCD color television SpecificationsSupplied accessories