Sonos ZP80 setup guide 1-2-3Setup, IF you are setting up a new Sonos system

4 Sonos ZonePlayer ZP80 Setup Guide

1-2-3 Setup

Note: The first ZonePlayer you install must connect to your home network using a standard Ethernet cable (supplied). If you should experience any difficulty during the setup process, please go to www.sonos.com/support for additional help.

IF you are setting up a new Sonos system

1

2

Attach the power cord and plug in the ZonePlayer ZP80.

Connect a standard Ethernet cable (supplied) from either of the two (2) Ethernet switch connectors on the back of your ZonePlayer ZP80 to an open port on your router (see A in the diagram below). Do not connect the ZonePlayer directly to your cable or DSL modem unless your modem has a built-in router.

•If you don’t have a router, go to http://faq.sonos.com/norouter for instructions.

If you have structured (built-in) wiring, connect the Ethernet cable into a live wall plate (see B in the diagram).

•If you don’t have an open port on your router, you can disconnect your computer from the router and connect it to the ZonePlayer ZP80 instead. Then connect the ZonePlayer