Toshiba 32HL85 owner manual Locking channels, Unlocking programs temporarily

Page 37

Unlocking programs temporarily

1.If you try to watch a TV program that exceeds the rating limits you set, the TV enters program lock mode. You can either unlock the program temporarily (see steps 2Ð4 below) or select an unlocked program to watch.

THIS PROGRAM HAS BEEN BLOCKED!

TV–Y

EXCEEDS SET LIMITS

PUSH "MUTE" TO ENTER PIN

TV 6

2.To temporarily unlock the program, press MUTE while the message is on-screen.

3.Press the Number buttons (0Ð9) to enter your 4-digit PIN code.

PIN CODE

BLOCKING ACTIVE

ENTER PIN CODE

TO TEMPORARILY UN–BLOCK

– – – –

0 - 9 SELECT

ENTER SET

4.Press ENTER.

If the correct code is entered, the program lock mode is released and the normal picture appears.

All locking is disabled until the TV is turned off, and will be enabled when the TV is turned on again.

Locking channels

With the CH LOCK feature, you can lock specific channels. You will not be able to tune locked channels using Channel y z or the Channel Number buttons unless you clear the setting.

You can lock a maximum of twelve channels. To lock channels:

1.From the LOCKS menu, press y or z to highlight CH LOCK, and then press ENTER.

The CH LOCK menu appears, and CH INPUT will be highlighted.

2.Press the Channel Number buttons to enter the channel you want to lock.

	TV/VIDEO	RECALL	POWER
		INFO
	1	2	3
	4	5	6	Channel
	7	8	9	Channel
	7	8	9	Number
	+10		CHRTN
	100	0	ENT
	U	FAV
		FAV
		DVDMENU		yzx •
				yzx •
		FAV		R
		FAV		ENTER
				ENTER
	CH	VOL		Channel yz
				Channel yz
	POP DIRECT CH MUTE		SLEEP

MUTE

LOCKS menu

	LOCKS
V-CHIP	ENTER
CH LOCK	ENTER

E

F

S

Introduction

Connecting	yourTV


Usingthe	remotecontrol


Settingup	yourTV

TVÕs

3. Press ENTER.

				CH LOCK

CH INPUT							1 2

				- - -	- - -		- - -
		- - -		- - -	- - -		- - -
	- - -			- - -	- - -		- - -
	- - -			- - -	- - -		- - -

					TV		CABLE

CLEAR ALL

ENTER

1000 - 9 SELECT ENTER SET

MENU BACK

EXIT WATCH TV

				CH LOCK
CH INPUT
CH INPUT							- - -

				- - -	- - -		- - -
		1 2		- - -	- - -		- - -
	- - -			- - -	- - -		- - -
	- - -			- - -	- - -		- - -

						TV	CABLE
CLEAR ALL							ENTER

1000 - 9 SELECT ENTER SET

MENU BACK

EXIT WATCH TV

VIDEO LOCK	OFF
NEW PIN CODE	– – – –

MENU BACK EXIT WATCH TV

Note:

After programming CH Lock, change the channel before turning off the TV.

Usingthe Features

4. Repeat steps 2 and 3 for other channels.

(continued on next page)

37

Appendix

Index

Image 37

Contents 32HL85 Dear Customer Safety PrecautionsInstallation Important Safety InstructionsCare cont. from previous column ServiceImportant notes about your LCD TV Introduction Check that you have the accessories and items shown Supplied accessoriesIntroduction Welcome to ToshibaExploring your new TV TV/VIDEO MenupowerConnecting an antenna or cable TV Connecting your TVChannels Connecting a cable converter box and VCR Connecting a VCRConnecting a DVD player or satellite receiver and a VCR DVD player with component video TV upper back panel TV lower back panel From DTV Antenna Connecting a camcorder Connecting two VCRs¥ one Hdmi cable type a connector Connecting an HDMIª or a DVI device to the Hdmi input¥ one HDMIÐtoÐDVI adapter cable Hdmi type a connector ¥ one pair of standard analog audio cablesPreparing the remote control for use Using the remote controlInstalling the remote control batteries Remote control effective rangeFor future reference, write down the codes you used Remote control codesRemote control codes Setting Your UsingtheTVÕs Features Appendix Index CLEAR/EXIT Remote Control function key chartMute reduces or turns off the sound Learning about the remote controlLearning about the menu system Setting up your TVPress x or to display your desired language Changing the on-screen display languageProgramming channels automatically Adding channels to the TVÕs memoryPress z to select CH Program Adding and erasing channels manually Changing channelsAdjusting the channel settings Using the TVÕs featuresSwitching between two channels using Channel Return Programming your favorite channelsConnecting Labeling channels Selecting the picture size Viewing the wide-screen picture formatsFull picture size ¥ None of the picture is hidden TheaterWide 1 picture size For 43 format programsPress MENU, and then press x or until the SET UP Adjusting the Picture PositionPress x or to adjust the settings as required Menu appearsUsing the Auto Aspect feature Setting the Hdmi audio modePress y or z to highlight Auto Aspect Press x or to select onSelecting the gray level for 43 mode side panels Using the gray screen functionTo turn on the gray screen function To turn off the gray screen function Select OFF in aboveUsing the V-CHIP menu Using the Locks menuEntering the PIN code If you cannot remember your PIN codeTV Rating Independent rating system for broadcasters OFF To release your setting UnlockTV Rating menu appears Press z or y to select an item Repeat steps 2 and 3 to set the next itemChip menu Mpaa Rating Independent rating system for moviesUnlocking programs temporarily Locking channelsRepeat steps 2 and 3 for other channels Repeat for other channels Changing the PIN code Locking the video inputsSelecting the picture mode Adjusting the pictureAdjusting the back light feature Press x or to select the mode you preferUsing the black stretch feature Adjusting the picture qualityUsing the CableClear¨ DNR feature Using the Mpeg NR featurePress x or to select LOW, MIDDLE, HIGH, or OFF Press x or to select LOW, MIDDLE, HIGH, or AutoSelecting the cinema mode Selecting the color temperatureLabeling the video input sources Selecting the video input sourcePress x or to highlight C1-C4 or T1-T4 Using the closed caption feature¥ To view text, highlight T1, T2, T3, or T4 Setting the on timer Setting the sleep timerMuting the sound Adjusting the soundSelecting stereo/SAP broadcasts Using the WOWª surround sound feature Using the StableSound¨ feature Adjusting the sound qualityPress x or to adjust the level To turn off the StableSound feature Select OFF in aboveUnderstanding the last mode memory feature Understanding the auto power off featureDisplaying on-screen information Appendix SpecificationsAntenna TroubleshootingBlack box appears on the screen T2, T3, or T4. Turn closed captioning OFFLimited United States Warranty Limited Canada Warranty Channel programming IndexToshiba ELECTROMEX, S.A. DE C.V