Toshiba 32HL85 owner manual Using the Mpeg NR feature, Using the CableClear¨ DNR feature

Page 42

Using the TVÕs Features

Using the MPEG NR feature

The MPEG NR (noise reduction) feature allows you to reduce visible interference caused by MPEG compression.

1.Press MENU, and then press x or • until the PICTURE menu appears.

2.Press y or z to highlight PICTURE SETTINGS, and then press ENTER. The PICTURE SETTINGS menu appears.

3.Press y or z to highlight MPEG NR.

PICTURE SETTINGS		2/2

BLACK STRETCH	ON
MPEG NR
MPEG NR	HIGH

CableClear DNR	AUTO

COLOR TEMPERATURE	MEDIUM

MENU BACK EXIT WATCH TV

4. Press x or • to select LOW, MIDDLE, HIGH, or OFF.

MPEG NR

MIDDLE

Using the CableClear¨ DNR feature

CableClear¨ DNR (digital noise reduction) reduces visible interference in your TV picture. This is useful when receiving a broadcast with a weak signal or playing a video cassette or disc damaged by repeated use.

To turn on CableClear DNR:

1.Press MENU, and then press x or • until the PICTURE menu appears.

2.Press y or z to highlight PICTURE SETTINGS, and then press ENTER. The PICTURE SETTINGS menu appears.

3.Press y or z to highlight CableClear DNR.

PICTURE SETTINGS		2/2
BLACK STRETCH	OFF
MPEG NR	HIGH
CableClear DNR
CableClear DNR	AUTO
COLOR TEMPERATURE	MEDIUM

MENU BACK EXIT WATCH TV

4. Press x or • to select LOW, MIDDLE, HIGH, or AUTO.

CableClear DNR

LOW

To turn off CableClear DNR:

Select OFF in step 4 above.

Note:

The MPEG NR feature is enabled for 480i signals only.

TV/VIDEO RECALL POWER

INFO

1 2 3

4 5 6

7 8 9

+10CHRTN

100 0 ENT

		NU				G
		E		FAV		UI
	O P	M	ITE	FAV	PIC	D
	O P	FAVOR	ITE		PIC	E
T		FAVOR			SI
						ZE

		MENU				MENU
		DVDMENU				yzx •
	ENTER			EXIT		R
N				EXIT		R
E
T		FAV			A
	E	FAV			A
	R			LE		ENTER
	R			C

TV		CH	VOL
CBL/SAT		CH	VOL
VCR
DVD
	POP DIRECT CH MUTE			SLEEP
TV/VCR		PAUSE	STOP	PLAY
		FREEZE	SOURCE	SPLIT
REW		FF	SKIP/SEARCH
Note:		SWAP	POP CH
CH SCAN		SWAP	POP CH
	REC			LIGHT
¥ The CableClear ¨					DNR feature works with

480i input sources only.

¥ When the TV is in ColorStream or HDMI mode, the words ÒCableClear DNRÓ will change to ÒDNRÓ in the menu.

¥ DNR is not selectable in HDMI mode.

42

Image 42

Contents 32HL85 Safety Precautions Dear CustomerImportant Safety Instructions InstallationService Care cont. from previous columnImportant notes about your LCD TV Introduction Introduction Supplied accessoriesCheck that you have the accessories and items shown Welcome to ToshibaTV/VIDEO Menupower Exploring your new TVConnecting your TV Connecting an antenna or cable TVChannels Connecting a VCR Connecting a cable converter box and VCRConnecting a DVD player or satellite receiver and a VCR DVD player with component video TV upper back panel TV lower back panel From DTV Antenna Connecting two VCRs Connecting a camcorder¥ one HDMIÐtoÐDVI adapter cable Hdmi type a connector Connecting an HDMIª or a DVI device to the Hdmi input¥ one Hdmi cable type a connector ¥ one pair of standard analog audio cablesInstalling the remote control batteries Using the remote controlPreparing the remote control for use Remote control effective rangeRemote control codes For future reference, write down the codes you usedRemote control codes Setting Your UsingtheTVÕs Features Appendix Index Remote Control function key chart CLEAR/EXITLearning about the remote control Mute reduces or turns off the soundSetting up your TV Learning about the menu systemChanging the on-screen display language Press x or to display your desired languageAdding channels to the TVÕs memory Programming channels automaticallyPress z to select CH Program Changing channels Adding and erasing channels manuallySwitching between two channels using Channel Return Using the TVÕs featuresAdjusting the channel settings Programming your favorite channelsConnecting Labeling channels Viewing the wide-screen picture formats Selecting the picture sizeFull picture size TheaterWide 1 picture size For 43 format programs ¥ None of the picture is hiddenPress x or to adjust the settings as required Adjusting the Picture PositionPress MENU, and then press x or until the SET UP Menu appearsPress y or z to highlight Auto Aspect Setting the Hdmi audio modeUsing the Auto Aspect feature Press x or to select onTo turn on the gray screen function Using the gray screen functionSelecting the gray level for 43 mode side panels To turn off the gray screen function Select OFF in aboveEntering the PIN code Using the Locks menuUsing the V-CHIP menu If you cannot remember your PIN codeTV Rating menu appears Press z or y to select an item OFF To release your setting UnlockTV Rating Independent rating system for broadcasters Repeat steps 2 and 3 to set the next itemMpaa Rating Independent rating system for movies Chip menuLocking channels Unlocking programs temporarilyRepeat steps 2 and 3 for other channels Repeat for other channels Locking the video inputs Changing the PIN codeAdjusting the back light feature Adjusting the pictureSelecting the picture mode Press x or to select the mode you preferAdjusting the picture quality Using the black stretch featurePress x or to select LOW, MIDDLE, HIGH, or OFF Using the Mpeg NR featureUsing the CableClear¨ DNR feature Press x or to select LOW, MIDDLE, HIGH, or AutoSelecting the color temperature Selecting the cinema modeSelecting the video input source Labeling the video input sourcesUsing the closed caption feature Press x or to highlight C1-C4 or T1-T4¥ To view text, highlight T1, T2, T3, or T4 Setting the sleep timer Setting the on timerAdjusting the sound Muting the soundSelecting stereo/SAP broadcasts Using the WOWª surround sound feature Press x or to adjust the level Adjusting the sound qualityUsing the StableSound¨ feature To turn off the StableSound feature Select OFF in aboveUnderstanding the auto power off feature Understanding the last mode memory featureDisplaying on-screen information Specifications AppendixBlack box appears on the screen TroubleshootingAntenna T2, T3, or T4. Turn closed captioning OFFLimited United States Warranty Limited Canada Warranty Index Channel programmingToshiba ELECTROMEX, S.A. DE C.V