Toshiba 32HL85 owner manual Setting the sleep timer, Setting the on timer

Page 46

Using the TVÕs Features

Setting the sleep timer

To use the remote control to set the sleep timer to turn off the TV automatically:

1. Press SLEEP to set the length of time until the TV turns off.

T I MER 00h00m

Every time you press SLEEP, the time display will increase by 10 minutes, up to 3 hours.

00h00m → 00h10m → 00h20m 02h50m → 03h00m

→00h00m

To use the menu system to set the sleep timer:

1.Press MENU, and then press x or • until the TIMER menu appears.

2.Press y or z to highlight SLEEP TIMER.

	TIMER
SLEEP TIMER		02:00

ON TIMER		00:00

MENU BACK EXIT WATCH TV

3.Press the Number buttons (0Ð9) or x or • button to enter the length of time until the TV turns off automatically.

4.Press EXIT to start the timer.

To cancel the sleep timer:

Press SLEEP until it is set to 00h00m.

Setting the ON timer

To set the ON timer to turn on the TV automatically:

1.Press MENU, and then press x or • until the TIMER menu appears.

2.Press y or z to highlight ON TIMER.

3.Press the Number buttons (0Ð9) or the x or • buttons to enter the length of time until the TV turns on automatically. You can set the ON timer in 10-minute increments, up to 12h00m.

4.Press EXIT. (The ON timer will start.)

	TIMER
SLEEP TIMER	00:00
ON TIMER
		10:30

MENU BACK EXIT WATCH TV

5.Press POWER to turn off the TV.

The TV will turn on automatically after the length of time you set in the ON timer.

TV/VIDEO RECALL POWER

POWER

INFO

RECALL

1 2 3

4 5 6

Number

7 8 9

+10CHRTN

100 0 ENT

			NU				G
			E		FAV		UI
		P	M	ORITE	FAV	PIC	D
	O	P		ORITE		PIC	E
T	O					SI
T			FAV			SI
			FAV				ZE

	MENU					MENU
	DVDMENU					yzx •
NENTER			EXIT		R	EXIT
E
T	FAV			A
E	FAV			A
R			LE
R			C
TV	CH	VOL
CBL/SAT	CH	VOL
VCR
DVD
POP DIRECT CH MUTE			SLEEP			SLEEP
						SLEEP
TV/VCR	PAUSE	STOP	PLAY
	FREEZE	SOURCE	SPLIT
REW	FF	SKIP/SEARCH
CH SCAN	SWAP	POP CH
REC			LIGHT

Note:

¥When an instant power failure occurs, the ON timer and sleep timer settings may be cleared.

¥To display the amount of time left until the TV turns on or off automatically, press

RECALL.

46

Image 46

Contents 32HL85 Safety Precautions Dear CustomerImportant Safety Instructions InstallationService Care cont. from previous columnImportant notes about your LCD TV Introduction Introduction Supplied accessoriesCheck that you have the accessories and items shown Welcome to ToshibaTV/VIDEO Menupower Exploring your new TVConnecting an antenna or cable TV Connecting your TVChannels Connecting a VCR Connecting a cable converter box and VCRConnecting a DVD player or satellite receiver and a VCR DVD player with component video TV upper back panel TV lower back panel From DTV Antenna Connecting two VCRs Connecting a camcorder¥ one HDMIÐtoÐDVI adapter cable Hdmi type a connector Connecting an HDMIª or a DVI device to the Hdmi input¥ one Hdmi cable type a connector ¥ one pair of standard analog audio cablesInstalling the remote control batteries Using the remote controlPreparing the remote control for use Remote control effective rangeRemote control codes For future reference, write down the codes you usedRemote control codes Setting Your UsingtheTVÕs Features Appendix Index Remote Control function key chart CLEAR/EXITLearning about the remote control Mute reduces or turns off the soundSetting up your TV Learning about the menu systemChanging the on-screen display language Press x or to display your desired languageProgramming channels automatically Adding channels to the TVÕs memoryPress z to select CH Program Changing channels Adding and erasing channels manuallySwitching between two channels using Channel Return Using the TVÕs featuresAdjusting the channel settings Programming your favorite channelsConnecting Labeling channels Selecting the picture size Viewing the wide-screen picture formatsFull picture size TheaterWide 1 picture size For 43 format programs ¥ None of the picture is hiddenPress x or to adjust the settings as required Adjusting the Picture PositionPress MENU, and then press x or until the SET UP Menu appearsPress y or z to highlight Auto Aspect Setting the Hdmi audio modeUsing the Auto Aspect feature Press x or to select onTo turn on the gray screen function Using the gray screen functionSelecting the gray level for 43 mode side panels To turn off the gray screen function Select OFF in aboveEntering the PIN code Using the Locks menuUsing the V-CHIP menu If you cannot remember your PIN codeTV Rating menu appears Press z or y to select an item OFF To release your setting UnlockTV Rating Independent rating system for broadcasters Repeat steps 2 and 3 to set the next itemMpaa Rating Independent rating system for movies Chip menuUnlocking programs temporarily Locking channelsRepeat steps 2 and 3 for other channels Repeat for other channels Locking the video inputs Changing the PIN codeAdjusting the back light feature Adjusting the pictureSelecting the picture mode Press x or to select the mode you preferAdjusting the picture quality Using the black stretch featurePress x or to select LOW, MIDDLE, HIGH, or OFF Using the Mpeg NR featureUsing the CableClear¨ DNR feature Press x or to select LOW, MIDDLE, HIGH, or AutoSelecting the color temperature Selecting the cinema modeSelecting the video input source Labeling the video input sourcesPress x or to highlight C1-C4 or T1-T4 Using the closed caption feature¥ To view text, highlight T1, T2, T3, or T4 Setting the sleep timer Setting the on timerMuting the sound Adjusting the soundSelecting stereo/SAP broadcasts Using the WOWª surround sound feature Press x or to adjust the level Adjusting the sound qualityUsing the StableSound¨ feature To turn off the StableSound feature Select OFF in aboveUnderstanding the last mode memory feature Understanding the auto power off featureDisplaying on-screen information Specifications AppendixBlack box appears on the screen TroubleshootingAntenna T2, T3, or T4. Turn closed captioning OFFLimited United States Warranty Limited Canada Warranty Index Channel programmingToshiba ELECTROMEX, S.A. DE C.V