Analogue APS and Programme Sorting
Before switching on the television put your decoder and media recorder to Standby if they are connected
and ensure the aerial is connected to your television.
APS (Automatic Programming System)
When the APS feature is selected all channels and settings will be lost, the television will return to factory settings and then
•Press MENU and using the Left or Right button select Program Table tab.
•The Program screen will appear on the screen. Press the BLUE button to start APS.
•When the search is complete the television will automatically select programme position 1. This may not be a clear picture or the signal may be weak, so the station order can be changed using program table which will appear on the screen.
•Press BACK to finish.
Sorting Programme Positions - Analogue
•Channels may be moved and saved to the position of your choice.
•Select Programme Table tab from the main analogue TV menu.
•With the list of channels showing, use navigation buttons to highlight the channel you want to move and press GREEN button. The selected channel will be highlighted with a frame.
•Use navigation buttons move through the list to your preferred position. As you do so, the other channels will move to make room.
•When finished, press GREEN button to save your move.
•Press the Left or Right button to set the country.
•Press the BLUE button to cancel APS or the RED or OK button to start.
You must allow the television to complete the search.
English - 14 -
00_MB45M_[GB]_3910UK_IDTV_SILVER8_32740W_(IB_INTERNET)_ | 10068433.indd 14 | 30.03.2011 14:31:32 |
|
|
|