PC Mode
PC Picture Position and PC Picture menus are described below. The other menu items are identical to TV
mode menus. Please see the previous sections.
Autoposition
If you shift the picture horizontally or vertically to an unwanted position, use this item to put the picture into correct place automatically.
•Select the PC POSITION option from the main menu. PC Position menu appears on the screen:
•Press the Down button to highlight Autoposition and then press the OK button.
H Position
H (Horizontal) Position shifts the image horizontally to right hand side or left hand side of the screen.
•In the PC POSITION menu press the Down button until H Position is highlighted.
•Press the Left or Right button to adjust the value.
V Position
V (Vertical) Position shifts the image vertically towards the top or bottom of the screen.
In the PC POSITION menu press the Down button until V Position is highlighted.
Press the Left or Right button to adjust the value.
Dot Clock
Dot Clock adjustment corrects interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts.
•In the PC POSITION menu press the Down button until Dot Clock is highlighted.
•Press the Left or Right button to adjust the value.
Phase
Depending on the resolution and scan frequency that you input to the TV Set, you may see a hazy or noisy picture on the screen. In such a case you can use this item to get a clear picture by trial and error method.
•In the PC POSITION menu press the Down button until Phase is highlighted.
•Press the Left or Right button to adjust the value.
Dot Clock
Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts.
•In the PC POSITION menu press the Down button until Dot Clock is highlighted.
Press the Left or Right button to adjust the value.
PC Picture controls
Contrast, Brightness and Colour Temperature adjustments in this menu are identical to adjustments defined in TV picture menu.
When Colour Temp is Manual, you can also adjust the R, G, B items. R, G and B adjust the TV image colour in PC RGB mode. You can change the TV colour to your desired colour: R (Red), G (Green), B (Blue)
Select Reset and press OK button to reset the adjustments to factory default settings.
Note:
For switching to PC source, press SOURCE button on your remote control and select PC input. You can also use Source menu to switch to PC mode.
Note that PC mode menu settings are available only while the TV is in PC source.
English - 28 -
00_MB45M_[GB]_3910UK_IDTV_SILVER8_32740W_(IB_INTERNET)_ | 10068433.indd 28 | 30.03.2011 14:31:38 |
|
|
|