Toshiba 42X3000A, 37X3000A, 46X3000A, 52X3000A Manually setting channels in the channel memory

- analog only -

Getting started

Manually setting channels in the channel memory

Use the Manual tuning operation if desired channels cannot be preset with the Auto tuning or if you would like to preset channels to specific position numbers one by one.

1From the SET UP menu, press ￿ or ￿ to select Manual tuning.

2Press Q to display the Manual tuning menu.

Press ￿ or ￿ to select the program position you want to arrange.

	Manual tuning
Prog.	Label
1
2
3
4
5
6
OK Select	Sort
MENU Back	EXIT Watch TV

3Press Q to display the breakdown menu.

Press ￿ or ￿ to select an item, then press ￿ or ￿ to select the item as shown below.

Manual tuning

Program

1 B/G A

OK	Store
MENU Back		EXIT Watch TV
A	C	E	G

B D F

A. Program position selection

B.Sound system (- page 41)

C.Color system (- page 41)

A : Automatic (factory set), P : PAL, S : SECAM

N4 : NTSC 4.43 (MHz), N3 : NTSC 3.58 (MHz) If the color of a certain channel is abnormal, the automatic color system selection (A) may have malfunctioned, or sound system selection is wrong. In such a case, select another color and/or sound system (- page 41).

D.Program position skip selection

Press ￿ or ￿ to turn the program position skip option on “8” or off “(”.

The program position will then be skipped when you select channels with PU or P u.

The “8” mark will appear beside a program position number when you use the Number button on the remote control.

E.Channel search operation

Press ￿to search up the band or ￿ to search down the

band.

Press ￿ or ￿ repeatedly until your desired channel is displayed.

When a station/satellite is found, it will be displayed.

NEVER PRESS ANY OTHER BUTTONS WHILE THE SET IS TUNING.

F.Auto Fine Tuning

Press ￿ or ￿ to turn the Auto Fine Tuning option on “9” or off “0”.

The Auto Fine Tuning function automatically corrects slight fluctuations when receiving signals.

Manual Fine Tuning

While the Auto Fine Tuning turn off “0”, press ￿ or ￿ so that the better picture and sound are obtained.

G.Label

Station labels appear under the program position

display each time you turn on the TV, select a channel, or press k.

To change or create station labels:

1)Press ￿ or ￿ repeatedly to select a character for the first space, then press ￿.

*(blank space)

2)Repeat step 1) to enter the rest of the characters. If you would like a blank space in the label name, you must choose a blank space from the list of characters.

Press Q to store your settings.

15