Using the TV’s features (General)
Adjusting the basic picture quality
1In Digital TV, press M, then press or to display the TV set up then press Q.
2Press or to display the PICTURE menu.
3In Analog TV, press M and or to display the
PICTURE menu.
PICTURE |
|
| |
|
|
|
|
Picture settings | OK | ||
|
|
|
|
3D Color management |
| Off |
|
Base color adjustment |
|
| |
|
| ||
Active Backlight Control |
| On |
|
|
| ||
Cinema mode |
| On |
|
|
|
|
|
MENU Back EXIT Watch TV |
|
| |
4Press or to select the Picture settings menu, then press Q.
Picture settings | 1/2 | |
|
|
|
Bac k light |
| 100 |
|
| |
Contrast |
| 100 |
|
| |
Brightness |
| 50 |
|
|
|
Color |
| 50 |
|
|
|
Tint |
| 0 |
|
| |
Sharpness |
| 0 |
MENU Back EXIT Watch TV
5Press or to select an item you want to adjust, then press or to adjust the settings as required.
| Contrast | 100 |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Selection | Pressing | ||
|
|
|
|
Back light | darker |
| brighter |
|
|
|
|
Contrast | lower |
| higher |
|
|
|
|
Brightness | darker |
| brighter |
|
|
|
|
Color | paler |
| deeper |
|
|
|
|
Tint | reddish |
| greenish |
|
|
|
|
Sharpness | softer |
| sharper |
|
|
|
|
Notes: |
|
|
|
•The Tint may only be adjusted on NTSC signal.
•In the PC input mode (- page 25), Color, Tint and Sharpness modes are not available.
Activating the black stretch
This function increases the strength of dark areas of the picture which improves definition.
1From the Picture settings menu, press or to select Black stretch on the 2nd page.
Picture settings | 2/2 | |
|
|
|
Black stretc h |
| On |
|
| |
MPEG NR |
| Low |
|
| |
DNR |
| Auto |
|
|
|
Color Temperature |
| Cool |
|
|
|
MENU Back EXIT Watch TV |
| |
2Press or to select On or Off.
Black stretch | On |
|
Note:
In the PC input mode (- page 25), this mode is not available.
Activating the MPEG NR (Noise Reduction)
If the receiving signal of MPEG is a mosquito (grained) noise depending on the compression and conversion, the noise may be reduced when using this function.
1From the Picture settings menu, press or to select MPEG NR on the 2nd page.
2Press or to select Off, Low, Middle or High.
MPEG NR | High |
|
Note:
In the PC input mode (- page 25), this mode is not available.
Activating the DNR (Digital Noise
Reduction) - analog only -
If the receiving signal is weak and the picture is blurry, the picture may be improved when using this function.
1From the Picture settings menu, press or to select DNR on the 2nd page.
2Press or to select Auto, Off, Low, Middle or High.
DNR | Auto |
|
Selecting the color temperature
You can change the tone of the picture by selecting from three preset color temperatures: Cool, Normal or Warm.
1From the Picture settings menu, press or to select Color Temperature on the 2nd page.
2Press or to select mode you prefer.
Color Temperature | Cool |
|
Cool: Lends a blue hue to the picture.
Normal: Neutral
Warm: Lends a red hue to the picture.
Adjusting the color management
You can adjust the picture color quality by selecting from 6 base color adjustments : Red, Green, Blue, Yellow, Magenta or Cyan.
1Press M, then press or to display the PICTURE menu.
2Press or to select 3D Color management, then press or to select On.
3D Color management | On |
|
3Press or to select Base color adjustment.
4Press Q, then press or to select an item you want to adjust.
Base color adjustment
|
| Hue | Saturation | Brightness |
| Red | 0 | 0 | 0 |
|
|
|
|
|
| Green | 0 | 0 | 0 |
|
|
|
|
|
| Blue | 0 | 0 | 0 |
|
|
|
|
|
| Yellow | 0 | 0 | 0 |
|
|
|
|
|
| Magenta | 0 | 0 | 0 |
|
|
|
|
|
| Cyan | 0 | 0 | 0 |
Reset |
|
| OK | |
|
|
|
|
|
MENU Back | EXIT Watch TV |
| ||
20