Toshiba 37X3000A, 46X3000A, 52X3000A, 42X3000A owner manual Watching TV programs

- analog only -

Getting started

Watching TV programs

Viewing Digital programs - digital only -

After you have tuned the TV, you have several ways to navigate through all programs:

•Press the Number buttons (a channel number has 4-digits) and you may omit the leading zeroes, which will be appended automatically; (Please note that if you have channels with different frequencies but the same channel number, the TV will always tune to the first channel that has been stored into the channel database. To view the other duplicating channels, you can select the channels from the Navigation List (see below) or use the PU / P u buttons.)

•Press PU / P u to view the previous and next program. The channels are arranged in ascending order according to the channel number.

•Press twice to display Favorite channel list and press ￿ or ￿ to select a program, then press Q to view the favorite program. Alternatively activating the Favorite Mode, then press PU / P u to select channels in Favorite channel list. See page 31 for more details.

Selecting channel from Navigation List

- digital only -

1When viewing in Digital TV, press to display the

Navigation List.

			Navigation List
Discovery			Mediacorp			ABC
0007	7 Digital 1	0008	8 Digital 1	0009	9	Digital
0070	7 Digital 2	0080	8 Digital 2	0090	9	Digital 1
		0081	8 Digital 3	0091	9	Digital 2
		0082	8 Digital 4	0092	9	Digital 3

Back Navigate Select Channel Watch TV

2Press ￿, ￿, ￿ and ￿ to select previewed program, then press Q.

3Press P to exit the menu and watch the previewed channel.

4Press twice to display Favorite channel list.

Changing the program position

1Enter the desired program position number using the Number buttons on the remote control.

For program positions below 10, use 0 and the required number e.g., for program position 1.

2You can also change the program position by using PU or

P u.

The program position will be displayed on the screen with the Mono/Stereo/Dual audio status.

Note:

The program position selection change between different format channels takes several seconds.

Switching between two program positions

You can switch two program positions without entering actual position number each time.

1Select the first program position you want to view.

2Select the second program position with the Number buttons (0-9).

3Press :. The previous channel will be displayed.

Each time you press :, the TV will switch back and forth between the two program positions.

Selecting the menu language - analog only -

Choose from 9 different languages (English, Chinese (CS), Malay, Thai, Vietnamese, Russian, Arabic, Persian or French) for the On-Screen-Display.

1Press M, then press ￿ or ￿ to display SET UP menu.

2Press ￿ or ￿ to select Language.

3Press ￿ or ￿ to select the desired language.

SET UP
Language	English
Auto tuning	OK
Manual tuning	OK
ANT ATT	Off
AV connection	OK
Picture position	OK
MENU Back EXIT Watch TV

Displaying the on-screen information

- analog only -

1Press k to display the following on-screen information.

4 ABCD Stereo

The information will disappear in 6 seconds.

•Program position or external input mode selected

•Program skip on/off information

•Label (if set)

•Mono/Stereo/Dual audio status

2To close the display instantly, press k again.

On-screen information - digital only -

When viewing in Digital TV, the on-screen information (I- Plate) will give the details of the channel program currently being viewed.

1Press c, to display the I-Plate.

		I-Plate
Channel 1202	ABC Sydney				Dec. 25
Now	News Today				12:30
	SD	TTX CC PG	Dolby
Next	Rock Concert in Sydney				SNR
	More Info			Watch TV

16