Using the TV’s features (General)
Using the stable sound
The Stable sound function limits the highest volume level to prevent extreme changes in volume when the signal source changes (for example, to prevent the sudden increase in volume that often happens when a TV programme switches to a commercial).
1Press M, then press or to display the SOUND menu.
2Press or to select Stable sound on the 2nd page.
SOUND | 2/2 | |
Stable sound |
| Off |
|
| |
Bass boost |
| Off |
Bass boost level |
| |
|
|
|
MENU Back EXIT Watch TV |
| |
3Press or to select On or Off.
Note:
The Stable sound effect is active only when the sound outputs from the speaker.
Using the bass boost
1From the SOUND menu, press or to select Bass boost on the 2nd page.
2Press or to select On.
SOUND | 2/2 | |
Stable sound |
| Off |
|
| |
Bass boost |
| On |
|
| |
Bass boost level |
| 70 |
|
|
|
MENU Back EXIT Watch TV |
| |
3Press to select Bass boost level.
4Press or to adjust the Bass boost level.
5To turn off the Bass boost, press or to display Bass boost, then press or to select Off.
Note:
The Bass boost effect is active only when the sound outputs from the speaker.
Other feature settings
Activating blue screen
With the blue screen function On, the screen will automatically turn blue and the sound will be muted when no signal is being received.
1Press M, then press or to display the FUNCTION menu.
2Press or to select Blue screen.
FUNCTION
Teletext |
| Auto |
|
|
|
Teletext language |
| 1 |
|
|
|
Auto format |
| On |
|
|
|
4:3 stretch |
| Off |
|
|
|
Blue screen |
| On |
|
|
|
Side panel |
| 1 |
MENU Back EXIT Watch TV |
| |
3Press or to select On or Off.
Note:
In the PC input mode (- page 25), this function is not available.
Activating the 4:3 stretch
When 4:3 stretch is activated, this function will switch 4:3 format programmes into a full screen picture.
1From the FUNCTION menu, press or to select 4:3 stretch.
2Press or to select On or Off.
Note:
In HDMI signal format, this function is available.
Adjusting the brightness of side panel
You can adjust the brightness of side panel in 14:9 or 4:3, etc. mode.
1From the FUNCTION menu, press or to select
Side panel.
2Press or to adjust the settings as required.
Side panel | 1 |
|
Setting the Time zone - digital only -
This function allows you to manually set the time zone and override the location that you have chosen during Auto Scan. This is to be used when you move out of Australia to country with different time zone. Please note that if you manually change the time zone setting, all existing entries in the programme timer will become invalid as they are still based on the old time zone. It is recommended that you delete all the entries in the programme timer before proceeding with steps described below.
1From the PROFILE menu, press or to select Time zone.
2Press and to select the local time zone.
DIGITAL SETTINGS
| PROFILE | ||
|
|
|
|
Audio Preference |
|
|
|
|
|
|
|
|
|
|
|
Time Format |
| 24 hr | |
|
|
|
|
|
|
|
|
Time zone |
| GMT +08:30 |
|
|
|
| |
Transparency | 70 |
| |
|
|
| |
|
|
| |
| 1 sec | ||
|
|
|
|
Back Select Function | Watch TV |
23