Toshiba 46XV500A Selecting the video input source to view, Setting the sleep timer, Video label

Using the TV’s features (General)

•If TV is already turned on when Alarm is activated, the TV will simply switch to the specific TV mode or channel at the Alarm start time.

•If TV is already running the Programme Timer when Alarm is set to activate on DTV mode, on Alarm activation the Alarm will only turn on the TV (if it was in standby) but not switch to the channel specified in the Alarm setting.

•If TV is already running the Programme Timer when Alarm is set to activate on a TV mode other than DTV, the Alarm will perform normally.

•If you do not press any button on the side panel of the TV or the remote control within 2 hours after Alarm is activated, the TV will enter standby automatically.

Setting the sleep timer

The Sleep timer is especially useful if you want the TV to turn itself off after a selected period of time.

1Press M, then press ￿ or ￿ to display the TIMER menu.

TIMER

Sleep timer 00:00

MENU Back EXIT Watch TV

2Press ￿ or ￿ to select Sleep timer.

3Press Number buttons (0-9) to set the time period to turn off the TV. Alternatively, press ￿ or ￿ to set the time

period. The timer display will set in blocks of 10 minutes to 12 hours and 50 minutes. If you press and hold ￿ or ￿ to set the time period, timer display will set in blocks of 30 minutes up to 12 hours 30 minutes.

4Press P to start the timer.

Selecting the video input source to view

1Press o on the remote control to display the video input mode list, then press ￿ or ￿ to select appropriate input source (or press o on the TV side panel or o on the

remote control repeatedly to select required input source directly). In Analog TV, you may also press Q to display the video input mode list.

DTV

1

2

3

HDMI1

HDMI2 REGZA-LINK

HDMI3

PC

ATV

Ex. PC VGA mode

PC VGA

2Press Q.

DTV (Digital TV)

o 1 (o (1), video 1 input),

o 2 (o (2), video 2 input) or o 2S (S-video input), o 3 (o 3, component video input),

HDMI1, HDMI2, HDMI3 (HDMI input), PC (o RGB/PC, PC input)

ATV (Analog TV)

Notes:

•When the component video input, PC input mode or HDMI input mode is selected, the AV OUTPUT terminals (- page 33) output audio signal only.

•If a REGZA-LINK device is connected to an HDMI input, the REGZA-LINKicon will appear.

•When the TV is switched on, it will take a few minutes for the REGZA-LINKicon to appear in the list; when an HDMI cable is removed, it will take a few minutes for the icon to disappear.

•If the HDMI cable from connected device is changed or HDMI device setting are changed, Enable REGZA-LINKin the REGZA-LINKmenu may need to be reset to On.

Setting the manual setting menu - analog only -

1Press M, then press ￿ or ￿ to display the SET UP menu.

	SET UP
Language		English
Manual setting		OK
AV connection		OK
Picture position		OK
MENU Back	EXIT Watch TV

2Press ￿ or ￿ to select Manual setting, then press Q.

3Press ￿ or ￿ to select an item, then press ￿ or ￿ to select the item as shown below.

Manual setting

Colour system:Auto

EXT1 A

OK Store

MENU Back EXIT Watch TV

AB

A.Colour System

Confirm that colour system is set to “A” (Auto). If not, select “A” with ￿ or ￿.

B.Video label

The video label allows you to label each input source for your TV.

To change or create video labels:

1)Press ￿ or ￿ repeatedly to select a character for the first space, then press ￿.

*(blank space)

2)Repeat step 1) to enter the rest of the characters. If you would like a blank space in the label name, you must choose a blank space from the list of characters.

3)Press Q to store your settings.

25