Toshiba 52HL167, 42hl167, 47HL167 manual LED indications, LED Indication Condition Solution

Page 74

Chapter 8: Troubleshooting

LED indications

The green and yellow LED lights on the TV front indicate the TV’s status, as described below.

Note: If the TV loses A/C power (e.g., a power outage occurs or the power cord is unplugged), when power is restored, the yellow LED will blink while the TV is booting until the remote control is usable. This is normal and is not a sign of malfunction.

TV front

POWER

Yellow LED Green LED

 

LED Indication

Condition

Solution

1)

Green is ON (solid).

The TV is operating properly.

 

 

 

 

2)

Yellow is ON (solid).

Standby with Power-On Mode set to Fast.

See “Selecting the Power-On Mode”

 

 

(- page 45).

 

 

 

3)

Yellow blinks three

TV is powering up.

Wait several seconds until the yellow LED stops

 

times.

 

blinking.

 

 

 

 

4)

Green blinks slowly.

Abnormal operation of BUS line.

Turn OFF the TV and unplug the power cord.

 

 

 

Plug the power cord in again and turn ON the TV.

5)

Green blinks

Power protect detection.

 

 

quickly.

 

 

 

 

 

 

If, after trying the solutions, the problem still exists:

In the U.S., call TACP Consumer Solutions at 1-800-575-5469.

In Canada, locate the nearest Toshiba authorized service depot by directing your web browser to www.toshiba.ca; click “Home Entertainment,” and then click “Support.”

74

Image 74
Contents 42HL167 47HL167 52HL167 Safety Precautions Dear CustomerAdditional Safety Precautions Important Safety InstructionsInstallation, Care, and Service InstallationService CareTo Display your LCD TV on the included Pedestal Stand To Display your LCD TV using a Wall BracketChoosing a location for your LCD TV Removing the Pedestal StandTrademark Information PartImportant notes about your LCD TV Contents Troubleshooting Welcome to Toshiba Features of your new TVIntroduction Introduction HD1, ColorStream HD2, Hdmi 1, Hdmi 2, Hdmi 3, PC TV front and side panel controls and connectionsGreen and Yellow LEDs TV back panel connections ColorStream HD-1 and ColorStream HD-2About the connection illustrations Connecting your TVOverview of cable types You will need Connecting a VCR and antenna or Cable TV no Cable boxTo view the antenna or Cable signal To view the VCRCoaxial cables Video cable Connecting a VCR with S-video and a cable boxTo view basic and premium Cable channels Standard audio cablesTo view the VCR or view and record antenna channels To view antenna or Cable channelsTo view the DVD player To record a TV program while watching a DVDIf you cannot locate the device’s infrared sensor To connect the IR blaster cableTo control the devices Select the Video 2 video input source on the TV Connecting a camcorderTo view the camcorder video To view the Hdmi device video Connecting an Hdmi or DVI device to the Hdmi inputTo connect an Hdmi device, you will need To connect a DVI device, you will needThree Hdmi cables CE-Link connectionBefore controlling the devices Connecting an audio system To control the audioTo connect a PC to the Hdmi terminal on the TV Connecting a personal computer PCTo connect a PC to the PC in terminal on the TV Remote control effective range Using the remote controlInstalling the remote control batteries To install the remote control batteriesLearning about the remote control TheaterWide 1/2/3, Full, 43 HD, and NativeSatellite DVD Remote Control functional key chartCombo Receiver CH RTN Mode Select Default device mode control before programming Using the remote control to operate your other devicesDevice code setup Mode Select Device mode control after programmingTo unlock the remote control’s volume keys Using the volume lock featureOperational feature reset To reset the remote controlSatellite receivers TVsCable boxes DVDs 3D LABDVD/VCR Combo VCRsKEC STS DBS/PVR Combo PVRsCable/PVR Combo Audio AmpAudio Amp/Tuners SAEIcon Option Menu layout and navigationMain menu layout Installation Setup/Installation menu layoutSetup menu Thinc menuNavigating the menu system VideoTo configure the ANT input source Setting up your TVConfiguring the antenna input source for the ANT terminal Selecting the menu languageTo program channels automatically Programming channels automaticallyManually adding and deleting channels in the channel memory To add or delete channels in the channel memorySetting the Auto Input feature To turn off the Auto Input To reset Auto InputLabeling channels To assign channel labelsTo remove channel labels Setting the Hdmi audio modeTo set the Hdmi audio mode To delete the custom labelViewing the system status Viewing the digital signal meterReset Factory Defaults To set the Power-On Mode feature Selecting the Power-On ModeTo cancel the reset Highlight No and press TTo label the video input sources Using the TV’s featuresLabeling the video input sources Press CABLE/SAT, DVD, or VCR/PVRFavorites Browser Tuning channelsTuning channels using Channel Browser Elements of the Channel Browser Adding and clearing channels and inputs in the History ListSwitching between two channels using SurfLock Tuning to a specific channel programmed or unprogrammedSwitching between two channels using Channel Return TheaterWide 1 picture size for 43 format programs Selecting the picture sizeNatural picture size TheaterWide 2 picture size for letter box programsTo set the scroll settings Full picture size for 169 480i, 480p source programs onlyUsing the Freeze feature Adjusting the picture quality Adjusting the pictureSelecting the picture mode Base closed captions Using the closed caption modeDigital CC Settings To view captions or textUsing the digital audio selector Adjusting the audioUsing the Closed Caption button on the remote control CC SelectorTo listen to stereo sound Press C or c to adjust the levelSelecting stereo/SAP broadcasts MTS field, select StereoUsing the StableSound feature Using the Dolby Digital Dynamic Range Control featureIf you cannot remember your PIN code Using the Locks menuEntering the PIN code Changing your PIN codeTo block and unblock TV programs and movies Press b to highlight Enable Rating BlockingBlocking TV programs and movies by rating V-Chip To download the additional rating system if availableTo unblock individual channels Blocking channelsTo block channels Using the input lock feature Unlocking programs temporarilyUsing the GameTimer Using the control panel lock featureTo adjust the PC settings Using the PC settings featureSetting the PC Audio To set the PC AudioCE-Link playback device HD DVD player, etc. control Setting the sleep timerUsing CE-Link Other CE-Link functions Volume and Mute controls of Audio ReceiverTo set the CE-Link Setup Displaying TV status information Understanding the auto power off featureUnderstanding the last mode memory feature Using dynamic contrast Using the TV’s advanced featuresUsing the advanced picture settings features Using the static gamma featureTo select the color temperature Selecting the color temperatureUsing CableClear digital noise reduction To change the CableClear settingsUsing Color Palette Adjustment Using Mpeg noise reductionUsing the ColorMaster feature To turn on Game Mode Using the Game Mode featureTo reset ColorMaster to its factory settings To turn off Game ModeTo adjust the WOW settings Using the advanced audio settings featuresUsing the SRS WOW surround sound feature Highlight Advanced Audio Settings and press TTroubleshooting General troubleshootingRating blocking V-Chip problems Channel tuning problemsClosed caption problems No CE-Link operationLED Indication Condition Solution LED indicationsAppendix SpecificationsFormat Resolution Frequency Pixel Clock Frequency Limited United States Warranty For LCD Televisions 26 and LargerLimited Canadian Warranty For Toshiba Brand Flat Panel TelevisionsDisclaimer and Limitation of Remedy Appendix Index FreezePage 07-05
Related manuals
Manual 82 pages 12.32 Kb Manual 82 pages 16.07 Kb