Toshiba 42hl167 manual Searching and sampling the code of a device, Using the volume lock feature

Page 28
While holding down the
Press CABLE/SAT.
Press the appropriate mode select button on the remote control.

Chapter 3: Using the remote control

Searching and sampling the code of a device (8500)

If you do not know the device code for a particular device, you can cycle the remote control through the available codes for that device mode and sample the functions to find the code that operates the target device. The keys available to be sampled, provided they are applicable to that mode, are p, 1, z, <, and S. Invalid keys will be ignored while in program mode.

To cycle through each available device code and sample its functions:

1

2 While holding down E, press 8, 5, 0, 0. The remote control will enter program mode.

3 Point the remote control at the target device and press p (or other function buttons that are available to be sampled).

4 If the device responds to the remote control:

Press Eto store the device code. The mode select button will blink two times and the remote control will exit the program mode.

If the device does not respond to the remote control:

Press B, and then press p. Repeat this step until the

device responds to the remote control, and then press E.

Note: When a search cycle is completed, the mode select button will blink three times. The remote control will begin to cycle through the available codes again. If no key is pressed within 10 seconds during programming, the remote control will exit the program mode and return to the previous code.

Using the volume lock feature (8000)

By default (factory setting), the remote control’s volume keys (zZand W) are locked to the “TV” device mode.

The remote control will operate the TV’s volume, even when “TV” is not the current device mode.

If you unlock the remote control’s volume keys, each device mode will have its own volume (if the device ID has volume data). The remote control will operate the volume of the device associated with the current device mode.

If you lock the remote control’s volume keys to a specific device mode, the remote control will operate the volume of the device associated with the locked mode, even when the locked mode is not the current device mode.

See “Using the remote control to operate your other devices” on page 27.

To lock the remote control’s volume keys to a specific mode (CABLE/SAT in this example):

1

2Ebutton, press 8, 0, 0, 0.

3 Press z. The CABLE/SAT mode select button will blink two times (locked).

The remote control’s volume keys will now operate the volume of the device associated with the CABLE/SAT mode, even when CABLE/SAT is not the current device mode.

To unlock the remote control’s volume keys:

1 While holding down E, press 8, 0, 0, 0.

2 Press Z. The CABLE/SAT mode select button will blink four times (unlocked).

Operational feature reset (8900)

This feature clears all programmed remote control features not related to “Device code setup” and resets the volume lock to the “TV” device mode.

To reset the remote control:

While holding down E, press 8, 9, 0, 0. The mode select button will respond with four blinks.

28

Image 28
Contents 42HL167 47HL167 Safety Precautions Dear CustomerImportant Safety Instructions Installation, Care, and ServiceAdditional Safety Precautions InstallationService CareTo Display your LCD TV using a Wall Bracket Choosing a location for your LCD TVTo Display your LCD TV on the included Pedestal Stand Removing the Pedestal StandImportant notes about your LCD TV PartTrademark Information Contents Troubleshooting Introduction Features of your new TVWelcome to Toshiba Introduction Green and Yellow LEDs TV front and side panel controls and connectionsHD1, ColorStream HD2, Hdmi 1, Hdmi 2, Hdmi 3, PC TV back panel connections ColorStream HD-1 and ColorStream HD-2Overview of cable types Connecting your TVAbout the connection illustrations Connecting a VCR and antenna or Cable TV no Cable box To view the antenna or Cable signalYou will need To view the VCRConnecting a VCR with S-video and a cable box To view basic and premium Cable channelsCoaxial cables Video cable Standard audio cablesTo view antenna or Cable channels To view the DVD playerTo view the VCR or view and record antenna channels To record a TV program while watching a DVDTo control the devices To connect the IR blaster cableIf you cannot locate the device’s infrared sensor To view the camcorder video Connecting a camcorderSelect the Video 2 video input source on the TV Connecting an Hdmi or DVI device to the Hdmi input To connect an Hdmi device, you will needTo view the Hdmi device video To connect a DVI device, you will needBefore controlling the devices CE-LINKconnectionThree Hdmi cables Connecting an audio system To control the audioConnecting a personal computer PC Format Resolution FrequencyTo connect a PC to the PC in terminal on the TV To connect a PC to the Hdmi terminal on the TVUsing the remote control Installing the remote control batteriesRemote control effective range To install the remote control batteriesLearning about the remote control TheaterWide 1/2/3, Full, 43 HD, and NativeCombo Receiver Remote Control functional key chartSatellite DVD CH RTN Using the remote control to operate your other devices Device code setupMode Select Default device mode control before programming Mode Select Device mode control after programmingUsing the volume lock feature Operational feature resetTo unlock the remote control’s volume keys To reset the remote controlCable boxes TVsSatellite receivers DVDs 3D LABDVD/VCR Combo VCRsKEC STS PVRs Cable/PVR ComboDBS/PVR Combo Audio AmpAudio Amp/Tuners SAEMain menu layout Menu layout and navigationIcon Option Setup/Installation menu layout Setup menuInstallation Thinc menuNavigating the menu system VideoSetting up your TV To configure the ANT input sourceSelecting the menu language To select the menu languageProgramming channels automatically Manually adding and deleting channels in the channel memoryTo program channels automatically To add or delete channels in the channel memorySetting the Auto Input feature To reset Auto Input Labeling channelsTo turn off the Auto Input To assign channel labelsSetting the Hdmi audio mode To set the Hdmi audio modeTo remove channel labels To delete the custom labelReset Factory Defaults Viewing the digital signal meterViewing the system status Selecting the Power-On Mode To cancel the resetTo set the Power-On Mode feature Highlight No and press TUsing the TV’s features Labeling the video input sourcesTo label the video input sources Press CABLE/SAT, DVD, or VCR/PVRTuning channels using Channel Browser Tuning channelsFavorites Browser Elements of the Channel Browser Adding and clearing channels and inputs in the History ListSwitching between two channels using Channel Return Tuning to a specific channel programmed or unprogrammedSwitching between two channels using SurfLock Selecting the picture size Natural picture sizeTheaterWide 1 picture size for 43 format programs TheaterWide 2 picture size for letter box programsTo set the scroll settings Full picture size for 169 480i, 480p source programs onlyUsing the Freeze feature Selecting the picture mode Adjusting the pictureAdjusting the picture quality Using the closed caption mode Digital CC SettingsBase closed captions To view captions or textAdjusting the audio Using the Closed Caption button on the remote controlUsing the digital audio selector CC SelectorPress C or c to adjust the level Selecting stereo/SAP broadcastsTo listen to stereo sound MTS field, select StereoUsing the StableSound feature Using the Dolby Digital Dynamic Range Control featureUsing the Locks menu Entering the PIN codeIf you cannot remember your PIN code Changing your PIN codePress b to highlight Enable Rating Blocking Blocking TV programs and movies by rating V-ChipTo block and unblock TV programs and movies To download the additional rating system if availableTo block channels Blocking channelsTo unblock individual channels Using the input lock feature Unlocking programs temporarilyUsing the GameTimer Using the control panel lock featureUsing the PC settings feature Setting the PC AudioTo adjust the PC settings To set the PC AudioUsing CE-LINK Setting the sleep timerCE-LINK playback device HD DVD player, etc. control To set the CE-LINK Setup Volume and Mute controls of Audio ReceiverOther CE-LINK functions Understanding the auto power off feature Understanding the last mode memory featureTo display TV status information using Recall To display TV status information using InfoUsing the TV’s advanced features Using the advanced picture settings featuresUsing dynamic contrast Using the static gamma featureSelecting the color temperature Using CableClear digital noise reductionTo select the color temperature To change the CableClear settingsUsing the ColorMaster feature Using Mpeg noise reductionUsing Color Palette Adjustment Using the Game Mode feature To reset ColorMaster to its factory settingsTo turn on Game Mode To turn off Game ModeUsing the advanced audio settings features Using the SRS WOW surround sound featureTo adjust the WOW settings Highlight Advanced Audio Settings and press TTroubleshooting General troubleshootingChannel tuning problems Closed caption problemsRating blocking V-Chip problems No CE-LINK operationLED Indication Condition Solution LED indicationsPin No Signal name SpecificationsAppendix Limited United States Warranty For LCD Televisions 26 and LargerLimited Canadian Warranty For Toshiba Brand Flat Panel TelevisionsDisclaimer and Limitation of Remedy Appendix Index FreezePage 07-03
Related manuals
Manual 82 pages 12.32 Kb Manual 82 pages 11.23 Kb