Toshiba 42hl167 Using the PC settings feature, Setting the PC Audio, To adjust the PC settings

Page 63

Chapter 6: Using the TV’s features

Using the PC settings feature

You can view an image from a PC on the TV screen.

When a PC is connected to the TV's PC IN terminal, you can use the PC Settings feature to make adjustments to the image.

If the edges of the picture are cut off, readjust the Horizontal Position and Vertical Position. If the picture is affected by interference, readjust the Clock Phase and Sampling Clock.

To adjust the PC settings:

1 Repeatedly press +to select PC input mode

(- “Selecting the video input source to view” page 46).

2 Press Yand open the Setup menu.

3 Highlight PC Settings and press T.

Setup

Installation

CE-LINK Setup

Sleep Timer

PC Settings

Power-On Mode Power-Saving

Note: If a PC is not connected or there is no pc input signal, this feature will be grayed out in the Setup menu.

4 Press B or b to highlight the item you want to adjust. 5 Press C or c to make the appropriate adjustments.

PC Settings

Horizontal Position

0

 

 

 

 

 

 

 

 

 

Vertical Position

0

 

 

 

 

 

 

 

 

Clock Phase

0

 

 

 

 

 

 

 

 

 

 

 

Sampling Clock

0

 

 

 

 

 

 

 

 

 

 

 

 

 

Reset

 

Done

 

 

 

 

 

 

 

Note: The screen is disrupted momentarily when adjusting the PC settings. This is not a sign of malfunction.

Horizontal Position:

Moves the picture left/right.

The adjustment range is within ±10 from center.*

Vertical Position:

Moves the picture up/down.

The adjustment range is within ±10 from center.*

Clock Phase:

Helps to reduce noise and sharpen the picture. The adjustment range is within ±4 from center.*

Sampling Clock:

Helps to reduce noise and minimize periodic vertical stripes on the screen.

The adjustment range is within ±5 from center.*

Setting the PC Audio

This function allows you to output the sound from your PC (if connected) or mute the sound from your PC and output the sound from your HDMI (DVI) connection. (- page 22)

To set the PC Audio:

1 Press Yand open the Audio menu.

2 Highlight Audio Setup and press T.

3 Press B or b to select PC Audio and then press C or c to select No or Yes.

Yes: Outputs the sound from your PC.

No: Mutes the sound from your PC, and outputs the sound from the HDMI-1 connection.

Audio Setup

PC Audio

 

No

 

 

 

 

 

 

HDMI 1 Audio

 

Auto

 

 

 

 

 

 

MTS

 

Stereo

 

 

 

Language

 

English

 

 

Optical Output Format

 

Dolby Digital

 

 

 

Dolby Digital

 

Compressed

Dynamic Range Control

 

 

 

 

 

 

 

 

 

 

 

Reset

 

 

Done

 

Note: Because the PC and HDMI-1 inputs share the same set of analog audio inputs, the PC Audio menu setting influences the HDMI 1 Audio menu setting. If PC Audio is set to “No,” the HDMI 1 Audio setting changes to “Auto.” If PC Audio is set to “Yes,” the HDMI 1 Audio setting is set to “Digital” and is grayed out in the menu. (Also see item 5 on page 12 and “Setting the HDMIAudio mode” on page 43.)

*The default settings may vary depending on the input signal format.

63

Image 63
Contents 42HL167 47HL167 Dear Customer Safety PrecautionsInstallation Important Safety InstructionsInstallation, Care, and Service Additional Safety PrecautionsCare ServiceRemoving the Pedestal Stand To Display your LCD TV using a Wall BracketChoosing a location for your LCD TV To Display your LCD TV on the included Pedestal StandPart Important notes about your LCD TVTrademark Information Contents Troubleshooting Features of your new TV IntroductionWelcome to Toshiba Introduction TV front and side panel controls and connections Green and Yellow LEDsHD1, ColorStream HD2, Hdmi 1, Hdmi 2, Hdmi 3, PC ColorStream HD-1 and ColorStream HD-2 TV back panel connectionsConnecting your TV Overview of cable typesAbout the connection illustrations To view the VCR Connecting a VCR and antenna or Cable TV no Cable boxTo view the antenna or Cable signal You will needStandard audio cables Connecting a VCR with S-video and a cable boxTo view basic and premium Cable channels Coaxial cables Video cableTo record a TV program while watching a DVD To view antenna or Cable channelsTo view the DVD player To view the VCR or view and record antenna channelsTo connect the IR blaster cable To control the devicesIf you cannot locate the device’s infrared sensor Connecting a camcorder To view the camcorder videoSelect the Video 2 video input source on the TV To connect a DVI device, you will need Connecting an Hdmi or DVI device to the Hdmi inputTo connect an Hdmi device, you will need To view the Hdmi device videoCE-LINKconnection Before controlling the devicesThree Hdmi cables To control the audio Connecting an audio systemTo connect a PC to the Hdmi terminal on the TV Connecting a personal computer PCFormat Resolution Frequency To connect a PC to the PC in terminal on the TVTo install the remote control batteries Using the remote controlInstalling the remote control batteries Remote control effective rangeTheaterWide 1/2/3, Full, 43 HD, and Native Learning about the remote controlRemote Control functional key chart Combo ReceiverSatellite DVD CH RTN Mode Select Device mode control after programming Using the remote control to operate your other devicesDevice code setup Mode Select Default device mode control before programmingTo reset the remote control Using the volume lock featureOperational feature reset To unlock the remote control’s volume keysTVs Cable boxesSatellite receivers 3D LAB DVDsVCRs DVD/VCR ComboKEC STS Audio Amp PVRsCable/PVR Combo DBS/PVR ComboSAE Audio Amp/TunersMenu layout and navigation Main menu layoutIcon Option Thinc menu Setup/Installation menu layoutSetup menu InstallationVideo Navigating the menu systemTo select the menu language Setting up your TVTo configure the ANT input source Selecting the menu languageTo add or delete channels in the channel memory Programming channels automaticallyManually adding and deleting channels in the channel memory To program channels automaticallySetting the Auto Input feature To assign channel labels To reset Auto InputLabeling channels To turn off the Auto InputTo delete the custom label Setting the Hdmi audio modeTo set the Hdmi audio mode To remove channel labelsViewing the digital signal meter Reset Factory DefaultsViewing the system status Highlight No and press T Selecting the Power-On ModeTo cancel the reset To set the Power-On Mode featurePress CABLE/SAT, DVD, or VCR/PVR Using the TV’s featuresLabeling the video input sources To label the video input sourcesTuning channels Tuning channels using Channel BrowserFavorites Browser Adding and clearing channels and inputs in the History List Elements of the Channel BrowserTuning to a specific channel programmed or unprogrammed Switching between two channels using Channel ReturnSwitching between two channels using SurfLock TheaterWide 2 picture size for letter box programs Selecting the picture sizeNatural picture size TheaterWide 1 picture size for 43 format programsFull picture size for 169 480i, 480p source programs only To set the scroll settingsUsing the Freeze feature Adjusting the picture Selecting the picture modeAdjusting the picture quality To view captions or text Using the closed caption modeDigital CC Settings Base closed captionsCC Selector Adjusting the audioUsing the Closed Caption button on the remote control Using the digital audio selectorMTS field, select Stereo Press C or c to adjust the levelSelecting stereo/SAP broadcasts To listen to stereo soundUsing the Dolby Digital Dynamic Range Control feature Using the StableSound featureChanging your PIN code Using the Locks menuEntering the PIN code If you cannot remember your PIN codeTo download the additional rating system if available Press b to highlight Enable Rating BlockingBlocking TV programs and movies by rating V-Chip To block and unblock TV programs and moviesBlocking channels To block channelsTo unblock individual channels Unlocking programs temporarily Using the input lock featureUsing the control panel lock feature Using the GameTimerTo set the PC Audio Using the PC settings featureSetting the PC Audio To adjust the PC settingsSetting the sleep timer Using CE-LINKCE-LINK playback device HD DVD player, etc. control Volume and Mute controls of Audio Receiver To set the CE-LINK SetupOther CE-LINK functions To display TV status information using Info Understanding the auto power off featureUnderstanding the last mode memory feature To display TV status information using RecallUsing the static gamma feature Using the TV’s advanced featuresUsing the advanced picture settings features Using dynamic contrastTo change the CableClear settings Selecting the color temperatureUsing CableClear digital noise reduction To select the color temperatureUsing Mpeg noise reduction Using the ColorMaster featureUsing Color Palette Adjustment To turn off Game Mode Using the Game Mode featureTo reset ColorMaster to its factory settings To turn on Game ModeHighlight Advanced Audio Settings and press T Using the advanced audio settings featuresUsing the SRS WOW surround sound feature To adjust the WOW settingsGeneral troubleshooting TroubleshootingNo CE-LINK operation Channel tuning problemsClosed caption problems Rating blocking V-Chip problemsLED indications LED Indication Condition SolutionSpecifications Pin No Signal nameAppendix For LCD Televisions 26 and Larger Limited United States WarrantyFor Toshiba Brand Flat Panel Televisions Limited Canadian WarrantyDisclaimer and Limitation of Remedy Appendix Freeze IndexPage 07-03
Related manuals
Manual 82 pages 12.32 Kb Manual 82 pages 11.23 Kb