control.
8 AFTER connecting all cables and devices, plug in the power cords for your TV and other devices. Then press POWER on the TV control panel or remote control to turn on the TV. If the TV stops
responding to the remote control or TV control panel and you cannot turn the TV off or on, please unplug the power cord a few seconds then plug it back in and try again.
9 See “Menu layout and navigation” for a quick overview of navigating the TV’s menu system
( page 23).
Install the batteries in the remote control ( page 21).
Connect your other electronic device(s) to the TV ( pages 14–20).
5
6
7 See “Learning about the remote control” ( page 22) for an overview of the buttons on the remote
• Read “Important notes about your LCD TV” ( page 7).
• Place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit. Secure the TV to a wall, pillar, or other immovable structure ( page 4).
• Place the TV in a location where light does not reflect on the screen.
• Place the TV far enough from walls and other objects to allow proper ventilation. Inadequate ventilation may cause overheating, which will damage the TV. THIS TYPE OF DAMAGE IS NOT COVERED UNDER THE TOSHIBA WARRANTY.
3 Do not plug in any power cords until AFTER you have connected all cables and devices to your TV.
4 BEFORE connecting cables or devices to the TV, learn the functions of the TV’s connections and
controls ( pages 12–13).
Observe the following when choosing a location for the TV:
2
Carefully read the important safety, installation,
care, and service information. Keep this manual for future reference.
1
Overview of steps for installing, setting up, and using your new TV
Follow these steps to set up your TV and begin using its many exciting features.
10Program channels into the TV’s channel memory ( page 26).
11For details on using the TV’s features, see Chapters 6 and 7.
12For help, refer to Chapter 8: Troubleshooting.
13For technical specifications and warranty information, see Chapter 9.
14Enjoy your new TV!
11