Chapter 6: Using the TV’s features
Scrolling the TheaterWide® picture (TheaterWide 2 and 3 only)
You can set separate scroll settings for the TheaterWide 2 and TheaterWide 3 modes for each input.
To set the scroll settings:
1無 Press 
and open the Picture menu.
2無 Highlight Theater Settings and press 
.
3無 In the Picture Size field, select either TheaterWide 2 or TheaterWide 3 (you cannot scroll in any other mode).
4無 Press to highlight the Picture Scroll field.
5無 Press or to scroll the picture up and down as needed.
6無 To save the new settings, highlight Done and press
. To revert to the factory defaults, highlight Reset and press 
.
Note: When receiving a signal at 480i resolution, the picture scroll function may have limited adjustment range.
Using the auto aspect ratio feature
When the auto aspect ratio feature is set to On, the TV will automatically select the picture size when one of the following input sources is received:
•A 480i, 480p, 720p, 1080i digital signal from the
ANT/CABLE input
•A 480i signal from the VIDEO/ColorStream HD input
•A 480i, 480p, 720p, 1080i, 1080p, or VGA (60Hz) signal from the HDMI 1, HDMI 2, and HDMI 3
Aspect ratio of signal | Automatic aspect size (automatically |
source | selected when Auto Aspect is On) |
|
|
4:3 normal | 4:3 |
|
|
4:3 letter box | TheaterWide 2 |
|
|
16:9 full | Full |
|
|
Not defined (no | The current picture size you set under |
data or HDMI aspect | “Selecting the picture size” on page |
data) | 33 |
|
|
Note: The auto aspect ratio feature is not applicable to PC input.
To turn on the auto aspect ratio feature:
1無 Press | and open the Picture menu. |
|
2無 Highlight Theater Settings and press | . | |
3無 In the Auto Aspect Ratio field, select On. |
| |
4無 To save the new settings, highlight Done and press 
. To revert to the factory defaults, highlight Reset and press 
.
To turn off the auto aspect ratio feature:
Select Off in Step 3 above.
Using the FREEZE feature
To use the FREEZE feature:
1無 When viewing the TV, press 
to make the picture a still picture.
2無 To return to the moving picture, press 
again (or any other button).
Note: If the TV is left in FREEZE mode for more than 15 minutes, the FREEZE mode will automatically be released and the TV will return to moving picture.
Using the FREEZE function for any purpose other than your private viewing may be prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.
Adjusting the picture
Selecting the picture mode
You can select your desired picture settings from four different modes, as described below.
Mode | Picture Quality | |
|
| |
Sports | Bright and dynamic picture (factory | |
setting) | ||
| ||
|
| |
Standard | Standard picture settings (factory setting) | |
|
| |
Movie | Lower contrast for darkened room | |
(factory setting) | ||
| ||
|
| |
PC | Designed for viewing of PC tables and | |
documents | ||
| ||
|
| |
Preference | Your personal preferences | |
|
|
(continued)
35