Toshiba 65H85C, 51H85C, 57H85C owner manual Connecting a VCR, Connecting a cable converter box

Page 9

Connecting a VCR

This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and record from one channel while watching another channel.

You will need:

¥two coaxial cables

¥one set of standard A/V cables

From Cable Box or Antenna

Stereo VCR

IN

IN from ANT OUT to TV

CH 3			OUT
CH 3
CH 4	VIDEO	L	R
			AUDIO

TV

Connecting a cable converter box

This connection allows you to watch basic and premium cable channels.

To watch basic cable and use the TVÕs features, select ANT-1. To view premium channels, select ANT-2, tune the TV to channel 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels.

You will need:

¥ three coaxial cables

From Cable

TV

OUT IN

Cable converter box

Note:

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.

If you have a VCR with S-video, use an

S-video cable (in the S-video jacks) instead of the standard video cable.

Do not connect a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time, or the picture performance will be unacceptable.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under Copyright Law and may subject you to civil and criminal liability.

Note:

When you use a converter box with your TV, the remote control will not operate some features, such as programming your favorite channels, labeling channels, and locking channels.

Introduction


Connecting	yourTV


Usingthe	remotecontrol


Settingup	yourTV


UsingtheTVÕs	Features


Appendix


Index

9

Image 9

Contents Index Projection TelevisionDear Customer Safety PrecautionsInstallation Important Safety InstructionsCare ServiceImportant Safety Precautions for Split Cabinet Feature Important Safety Information Introduction Introduction Connecting YourTV Control Welcome to ToshibaExploring your new TV Connecting your TV Connecting your TVConnecting a cable converter box Connecting a VCRIf you have a VCR with S-video, use an Connecting a cable converter box and VCRConnecting a DVD player or satellite receiver and a VCR From Antenna Stereo VCR From DTV Antenna Connecting a camcorder Connecting two VCRs¥ one Hdmi cable type a connector Connecting an Hdmitm or a DVI device to the Hdmi inputIntroduction ¥ one pair of standard analog audio cablesConnecting an audio system Installing the remote control batteries Preparing the remote control for useRemote control effective range If you have a Toshiba deviceRemote control codes Using the remote controlFor future reference, write down the codes you used Remote control codes 100 CLEAR/EXIT Remote Control function key chartUsing remote Learning about the remote controlAdjusts the volume level CH RTN returns to the memorized channelConnecting YourTV Usingthe Remotecontrol Settingup UsingtheTVÕs Features AppendixLearning about the menu system Changing the on-screen display language Setting up your TVSelecting the antenna input Press y or z to highlight your desired languageUsing Remote Settingup YourTV TVÕs Connecting YourTV ControlUsingthe Features Adding channels to the TVÕs memoryAdding and erasing channels manually Changing channelsIntroduction Connecting your TV Adjusting the color convergenceUsingthe Remotecontrol Manually adjusting the color convergenceUp TV To reset your adjustmentsSwitching between two channels using Channel Return Adjusting the channel settingsSwitching between two channels using SurfLockª Programming your favorite channelsPress y or z to highlight Favorite CHPress Enter to display the Favorite CH menu Settingup yourTV Introduction Connecting YourTV Usingthe RemotecontrolLabeling channels ClearNatural picture size Selecting the picture sizeIntroduction Connecting YourTV Setting yourUsingtheTVÕs Features Scrolling the TheaterWide¨ picture TheaterWide 2 and 3 only Usingthe control Using the Auto Aspect featureSettingup YourTV UsingtheTVÕs Features Appendix Index EnterPOP window using the VCRÕs channel keys Using the POP double-window featurePress Split to display the POP window Window Video 1, Video 2, Video 3, ColorStream HD1Switching the speaker sound of main and POP programs Switching the main and POP picturesUsingthe Remotecontrol Settingup YourTV TheTVÕs UsingDouble-Window aspect ratio Using the programmed channel search functionAbout the auto favorite feature Using the favorite channel search functionUsing the V-CHIP menu Using the Locks menuEntering the PIN code If you cannot remember your PIN codeTV Rating Independent rating system for broadcasters Enable BlockingMpaa Rating Mpaa Rating Independent rating system for moviesMpaa Unrated TV None RatingLocking channels Connecting yourTVUnlocking programs temporarily Repeat steps 3 and 4 for other channelsPress y or z to highlight Clear ALL, and then press Enter Changing the PIN code Locking the video inputsOFF Press Enter New PIN code is now activeAdjusting the picture Selecting the picture modeAdjusting the picture quality Selecting the color temperature Press x or to select the mode you preferSaving your new preferences Resetting picture adjustments Using the CableClear¨ DNR featureReset ÒdoneóSelecting the cinema mode Selecting the display format for 480p signals onlyPress y or z to select FilmThat input source Selecting the video input sourceTo highlight Custom Menu To exit the menu, press ExitPress y or z to highlight Caption or TEXT, and then press Using the closed caption featureSetting the sleep timer Setting the on timerPress y or z to highlight Clock SET, and then press Enter To set the clockPress Enter to start the clock To display the time on-screen Press RecallAdjusting the sound Muting the soundSelecting stereo/SAP broadcasts Adjusting the sound quality Using the WOWª surround sound featurePress y or z to adjust the item, then press Enter Audio Settings menu appearsResetting your audio adjustments Using the StableSound¨ featureTo turn off the StableSound feature Select OFF in above Selecting the Audio OUT sound Turning off the built-in speakersTo turn on the built-in speakers Select on in above Press y or z to select Main or POP, and then press EnterUnderstanding the last mode memory feature Understanding the auto power off featureSelecting the background of the menu display Displaying on-screen informationAppendix SpecificationsAntenna TroubleshootingBlack box appears on the screen T2, T3, or T4. Turn closed captioning OFFLimited Canada Warranty Index Page Manufactured by