Using the TV’s features (General)
PC
Use this setting for PC via HDMI. When receiving 1080i, 1080p or 720p signal format of HDMI input, this setting will display the image correctly without distortion or picture clipping.
Notes:
•Using the special functions to change the size of the displayed image (e.g. changing the height/width ratio) for the purpose of public display or commercial gain may infringe on copyright laws.
•If the aspect ratio of the selected format is different from the one of the TV transmission or video program, it can cause a difference in vision. Change to the correct aspect ratio picture size.
•In the PC input mode (- page 25), the picture size selection is wide or normal only.
•When using the PC input mode, the moving image quality may be deteriorated.
•In the 720p input signal mode, the picture size selections are Wide, Super Live 2, Cinema 2, 4:3, Super Live 1 and Cinema 1.
•In Digital TV, the picture size selections are Super Live 1, Cinema 1, Wide, Super Live 2, Cinema 2 and 4:3.
When receiving 1080i or 1080p signal, you can additionally choose Exact Scan.
•When using Exact Scan you may observe a shift in picture position. This is due to the signal source and is not a defect of the TV.
•When DTV teletext (- page 28) or Subtitle (- page 31) is displayed, the picture size selection is not available.
Using the picture still
• Press R to freeze the picture.
Even if an image is frozen on the TV screen, the pictures are running on the input source. Audio continues to be output as well.
To return to a moving picture, press R again.
(Moving) | (Still) |
Notes:
•If you use this function except for the purpose of your private viewing and listening, it may infringe the copyright protected by the copyright laws.
•In the PC input mode (- page 25), this function is not available.
Adjusting the picture position - analog only -
Adjustment to the position of the picture may be made to suit your viewing preferences.
1Press M, then press or to display the SET UP menu.
2Press the or to select Picture position.
SET UP |
|
| |
|
|
|
|
Language |
| English |
|
Auto tuning | OK | ||
Manual tuning | OK | ||
|
|
|
|
ANT ATT |
| Off |
|
AV connection | OK | ||
|
|
|
|
Pic ture position | OK | ||
|
|
|
|
MENU Back EXIT Watch TV |
|
| |
3Press Q, then press or to select an item you want to adjust.
Picture position
Horizontal position | 0 |
|
|
Vertical position | 0 |
Reset | OK |
MENU Back EXIT Watch TV
4Press or to adjust the settings as required.
Horizontal position | 0 | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Note:
When the picture format is in Wide or 4:3 mode, only the Horizontal position can be adjusted.
Resetting the picture position - analog only -
This function resets your picture position settings to the factory settings.
1From the Picture position menu, press or to select Reset.
2Press Q.
Selecting the picture mode
You can select the picture quality instantly among three preset modes and one
•Press N to select the desired picture quality.
Dynamic
Mode | Picture quality |
q Dynamic | bright and dynamic picture |
|
|
q Standard | standard picture |
|
|
q Mild | soft picture |
|
|
q Memory | the picture quality you set |
|
|
Note:
In the PC input mode (- page 25), this mode is not available.
19