Using the TV’s features (General)
5Press , then press or to select Hue, Saturation or
Brightness.
|
| Hue | Saturation | Brightness | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| Red | 0 | 0 |
| 0 |
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6Press or to adjust the settings as required.
Notes:
•If you select color management Off mode, this mode is not available.
•In the PC input mode (- page 25), this mode is not available.
Resetting the base color adjustment
The Reset function adjusts the base color adjustment to the factory settings.
1From the Base color adjustment menu, press or to select Reset.
2Press Q.
Using the active backlight control
In order to improve screen visibility, the active backlight control sets the screen brightness automatically during dark scenes.
1From the PICTURE menu, press or to select
Active Backlight Control.
2Press or to select On or Off.
Using the cinema mode - analog only -
A movie film’s picture runs at 24 frames a second, whereas movie software such as DVD, etc., that you enjoy watching on television at home runs at 30 (NTSC) or 25 (PAL) frames a second. To convert this signal to reproduce a smooth motion and picture quality, select the On mode.
Effective signal and setup conditions:
•When the Video input mode is selected.
•When the input signal format is 480i and 576i signals.
1Press M, then press or to display the PICTURE menu.
PICTURE |
|
| |
Picture settings | OK | ||
|
|
|
|
3D Color management |
| Off |
|
Base color adjustment |
|
| |
|
| ||
Active Backlight Control |
| On |
|
|
| ||
Cinema mode |
| On |
|
|
|
|
|
MENU Back EXIT Watch TV |
|
| |
2Press or to select Cinema mode, then press or to select On or Off.
Note:
When a DVD movie with subtitle is playing back, this mode may not work correctly.
Using the auto format
When the TV receives a true HDMI signal picture and the auto format is On, it will automatically be displayed in HDMI signal format, irrespective of the TV’s previous setting. When in Digital TV, the display format will follow the broadcasted format.
1Press M, then press or to display the FUNCTION menu.
| FUNCTION | ||
|
|
|
|
Teletext |
| Auto |
|
|
|
|
|
Auto format |
| On |
|
|
|
|
|
Blue screen |
| On |
|
|
|
| |
Side panel |
| 1 |
|
|
|
|
|
MENU Back | EXIT Watch TV | ||
2Press or to select Auto format, then press or to select On or Off.
Activating the ANT ATT (Antenna Attenuation)
If the signal being received by the TV is too strong, this may result in picture interference and/or buzzing sound. Setting ANT ATT to On reduces signal strength, and can help to remove the interference.
1From SET UP menu, press or to select ANT ATT.
2Press or to select On or Off.
SET UP |
| |
|
|
|
Language |
| English |
Auto tuning | OK | |
|
|
|
Manual tuning | OK | |
|
|
|
ANT ATT |
| Off |
AV connection | OK | |
Picture position | OK | |
|
|
|
MENU Back EXIT Watch TV |
| |
21