Toshiba 50PH4700, 60PH6700 owner manual Magic Remote Control Functions

Magic Remote Control Functions 33

Magic Remote Control Functions

For 60PH6700

When the message “Magic remote control battery is low. Change the battery.” is displayed, replace the battery. To install batteries, open the battery cover, insert batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control at the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse.

CAUTION

yyDo not mix old and new batteries, as this may damage the remote control.

This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote sensor.

Wheel (OK)		Pointer (RF transmitter)
Selects menus or options and confirms
your input.				(POWER)
Scrolls through the saved channels.
If you press the navigation button while				Turns the TV on or off.
moving the pointer on the screen,
the pointer disappears, and the Magic
remote control works as a regular				Navigation buttons
remote control.
To display the pointer again, shake the				(up/down/left/right)
Magic remote control from side to side.				Scrolls through menus or options.
BACK	BACK		SMART	SMART
Returns to the previous screen.				Accesses the Smart Home menu.
Voice recognition
-This is a beta version and only available
in selected functions for supported			/Q.MENU	/Q.MENU
models.
-Network connection is required to use				Accesses the Universal Control.
				Accesses the quick menu.
the voice recognition function.
1. Press the Voice recognition button.
2. Speak slowly and precisely.		VOL	CH
When a voice is recognized, the				VOL
processing message appears on the
screen.				Adjusts the volume level.
• Use the magic remote control no				CH
further than 10 cm from your face.				Scrolls through the saved
				channels.
				(MUTE)

Used for viewing 3D video. Mutes all sounds.

ENGLISH