Programming channels into the TV’s channel memory

Chapter 6: Setting up your TV

Programming channels into the TV’s channel memory

When you press CHANNEL y or z on the remote control or TV front panel, your TV will stop only on the channels stored in the TV’s channel memory.

Follow the steps below to program channels into the TV’s channel memory.

Programming channels automatically

Your TV can automatically detect all active channels in your area and store them in its memory. After the channels are programmed automatically, you can manually add or erase individual channels.

Note:

¥If you already programmed channels automatically during the Quick Connect Guide assisted setup, you can skip to ÒManually adding and deleting channels in the channel memoryÓ on the next page.

¥You must configure the antenna input sources before programming channels (see page 41).

¥The automatic channel programming process does NOT erase channels that were previously programmed into the TVÕs memory, but adds newly found channels to the existing set of programmed channels. To remove a channel from the memory, you must manually delete it (see next page).

¥To tune the TV to a channel not programmed in the channel memory, you must use the Channel Number buttons on the remote control.

¥Programming channels for an antenna input configured for CABLE will take substantially longer than for an antenna input configured for ANTENNA. This is normal; however, once channel programming is completed, you should not have to repeat the programming process again unless your Cable TV service lineup changes significantly.

To program channels automatically:

1.Make sure you have configured the antenna input sources. See page 41 for details.

2.Press MENU and open the SETUP menu.

3.Highlight INSTALLATION and press ENTER. (A new set of INSTALLATION menu icons will appear on-screen, as shown in step 4).

Setup

Installation

Sleep Timer

On/Off Timer

Digital Tuner Hold • • • • • • • Off

Slide Show Interval • • • 2 Sec

Convergence

4.Open the TERRESTRIAL menu, highlight CHANNEL PROGRAM, and press ENTER.

5.Highlight ANT 1 or ANT 2, depending on which antenna input you want to program channels for, and then press ENTER to start automatic channel programming.

		i	ANT 1 Cable
		i	Scanning channels, please wait...
					0%
					0%
Terrestrial
Terrestrial				Abort
Input Configuration	ANT 1
	ANT 2
Channel Program	ANT 2

Channel Add/Delete

Signal Meter

The TV will automatically cycle through all the channels for the antenna input you selected, and store all active channels in the channel memory. While the TV is cycling through the channels, the message “Scanning channels, please wait” appears (as shown above right).

To cancel channel programming, highlight ABORT and press ENTER.

6.When channel programming is done, press CHANNEL y or z to view the programmed channels.

(Continued on next page)

Channel

Numbers

	+10
	–
ACTION	100
MENU	THEATER
	NET

FAV

ENTER

PAGE

–

CHANNEL yz

TV front panel


MENU	VOLUME	CHANNEL	EXIT TV/VIDEO TouchFocus

CHANNEL z / y

42	Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.

(E) 51/57/65HX93

51HX93 specifications

The Toshiba 51HX93 is a remarkable television that gained attention for its impressive features and cutting-edge technologies. This model, part of Toshiba's line of high-definition televisions, offers an immersive viewing experience suitable for a variety of entertainment.

One of the standout features of the Toshiba 51HX93 is its generous 51-inch screen size which provides a large viewing area, making it perfect for watching movies, sports, or playing video games. It utilizes a rear-projection technology which enhances the viewing angles, allowing viewers to enjoy high-quality images from different positions in the room.

The television boasts a native resolution of 1080p, ensuring sharp and vibrant picture quality. With its high-definition display, colors appear more vivid, and details are pronounced, elevating the overall viewing experience. The incorporation of Toshiba's proprietary PixelPure technology further enhances image clarity, allowing for smoother motion and reducing artifacts that may detract from the visual delight.

Equipped with a built-in digital tuner, the Toshiba 51HX93 allows users to access a wide array of over-the-air television channels without the need for an external set-top box. This feature is particularly advantageous for cord-cutters who prefer streaming and local programming.

Audio quality is equally impressive, featuring Toshiba’s proprietary sound technology that delivers rich and cinematic sound. The built-in speakers are designed to provide a surround sound experience, enabling users to feel engrossed in their favorite shows and films.

Connectivity options are plentiful; the television comes with multiple HDMI inputs, allowing for easy connections to various devices such as gaming consoles, Blu-ray players, and sound systems. Additionally, the inclusion of component and composite inputs offers versatility for connecting older devices.

The Toshiba 51HX93 is designed with user-friendly features in mind, including an intuitive on-screen interface, making it simple to navigate through channels and settings. The television also supports Picture-in-Picture (PIP), allowing viewers to watch two programs simultaneously, enhancing the multitasking ability of the device.

In conclusion, the Toshiba 51HX93 is a well-rounded television that combines impressive screen size, high-definition capabilities, and rich audio quality. Its modern technologies and user-friendly features make it a solid choice for those looking to upgrade their home entertainment systems. Whether for movie nights or catching the latest sports event, the Toshiba 51HX93 delivers a satisfying and versatile viewing experience.