Toshiba 51HX93 Using the auto aspect ratio feature 480i signals only, To set the scroll settings

Chapter 8: Using the TVÕs features

Scrolling the Theater Wide picture (Theater Wide 2 and 3 only)

You can set separate scroll settings for Theater Wide 2 and Theater Wide 3 modes.

To set the scroll settings:

Using the auto aspect ratio feature (480i signals only)

When the AUTO ASPECT feature is set to ON and the TV receives a 480i signal, the picture size is automatically selected, as described in the following table.

1.Press MENU and open the VIDEO menu.

2.Highlight THEATER SETTINGS and press ENTER.

Video

Picture Settings

Theater Settings

Advanced Picture Settings

Aspect ratio

of signal source

4:3

16:9

Not defined

(no ID-1 data)

Automatic aspect size

(automatically selected

when AUTO ASPECT is ON)

Theater Wide 2

Full

User-selected picture size

(see pages 64Ð65)

3.In the PICTURE SIZE field, select either Theater Wide 2 or Theater Wide 3 (you cannot scroll in any other mode).

4.Press z to highlight the PICTURE SCROLL field.

5.Pressx or • to scroll the picture as needed, from –10 to +20.

Theater Settings		Theater Settings
Picture Size		Picture Size
	Theater Wide 2		Theater Wide 2

Picture Scroll 0 Picture Scroll -10

Cinema Mode		Video	Cinema Mode			Video
Display Format			Display Format
		1080i				1080i
Auto Aspect Ratio			Auto Aspect Ratio
		On				On
Save	Done	Reset		Save	Done	Reset

6.To save your scroll settings temporarily, highlight DONE and press ENTER.

To save your scroll settings permanently, highlight SAVE and press ENTER.

Note:

•The AUTO ASPECT feature applies to 480i signals received from the VIDEO 1, VIDEO 2, VIDEO 3, or ColorStream HD1/HD2 input sources only, and is not applicable to antenna, Cable, or DVI input sources.

•The AUTO ASPECT feature is not available when the POP double-window is open.

To turn on the AUTO ASPECT feature:

1.Press MENU and open the VIDEO menu.

2.Highlight THEATER SETTINGS and press ENTER.

Video

Picture Settings

Theater Settings

Advanced Picture Settings

3.In the AUTO ASPECT RATIO field, select ON.

4.To save your settings temporarily, highlight DONE and press ENTER.

To save your settings permanently, highlight SAVE and press ENTER.

Theater Settings
Picture Size		Natural
Picture Scroll	0
Cinema Mode		Video
Display Format		1080i
Auto Aspect Ratio		On
Save	Done	Reset

To turn off the AUTO ASPECT feature:

Select OFF in step 3 above.

66 Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.

(E) 51/57/65HX93