Toshiba 51HX93 Using CableClear DNR digital noise reduction, Selecting the color temperature

Chapter 8: Using the TVÕs features

Adjusting the picture (continued)

Using CableClear™ DNR (digital noise reduction)

The CableClear digital noise reduction feature allows you to reduce visible interference in your TV picture. This is useful when receiving a broadcast with a weak signal (especially a Cable channel) or playing back a video cassette or disc damaged by repeated use.

Note: The CableClear DNR feature does not function in DVI, ATSC, digital Cable, VIDEO, and ColorStream modes.

To turn on CableClear DNR:

1.Press MENU and open the VIDEO menu.

2.Highlight ADVANCED PICTURE SETTINGS and press

ENTER.

3.Press z to highlight the CABLECLEAR DNR field, and then press • to select AUTO.

	Advanced Settings
	ALS		On
Video	Flesh Tone		On
Picture Settings	CableClear DNR		Auto
Theater Settings	VSM		Off
	Color Temperature		Cool
Advanced Picture Settings
	Save	Done	Reset

4.To temporarily save the new settings, highlight DONE and press ENTER. To permanently save the new settings, highlight SAVE and press ENTER.

To turn off CableClear DNR:

Select OFF in step 3 above.

Adjusting the velocity scan modulation

The velocity scan modulation (VSM) feature enhances picture contrast and sharpness. This feature has three modes: HIGH, LOW, and OFF.

Note: VSM is not required when viewing some high-quality video material. If you are watching high-quality video material, you may want to set VSM to OFF.

To adjust the VSM:

1.Press MENU and open the VIDEO menu.

2.Highlight ADVANCED PICTURE SETTINGS and press

ENTER.

3.	Press z to highlight the VSM
		Advanced Settings
	field, and then press • to		ALS
	select the mode you prefer				On
			Flesh Tone
					On
	(HIGH, LOW, or OFF).		CableClear DNR
					Off
4.	To temporarily save the new		VSM		High
			Color Temperature
					Cool
	settings, highlight DONE
			Save	Done	Reset
	and press ENTER.

To permanently save the new settings, highlight SAVE and press ENTER.

Selecting the color temperature

You can change the quality of the picture by selecting from three preset color temperatures: cool, medium, and warm, as described below.

Mode Picture Quality

cool blueish medium neutral

warm reddish

To select the color temperature:

1.Press MENU and open the VIDEO menu.

2.Highlight ADVANCED PICTURE SETTINGS and press

ENTER.

3.Press z to highlight the COLOR TEMPERATURE field, and then press • to select the mode you prefer (COOL, MEDIUM, or WARM).

	Advanced Settings
	ALS		On
Video	Flesh Tone		On
Picture Settings	CableClear DNR		Off
	VSM		Off
Theater Settings
	Color Temperature		Cool
Advanced Picture Settings
	Save	Done	Reset

4.To temporarily save the new settings, highlight DONE and press ENTER.

To permanently save the new settings, highlight SAVE and press ENTER.

Resetting the advanced picture settings

To reset the advanced picture settings to their factory values:

1.Press MENU and open the VIDEO menu.

2.Highlight ADVANCED PICTURE SETTINGS and press

ENTER.

3.Highlight RESET and press ENTER.

4.Highlight SAVE and press ENTER.

	Advanced Settings
	ALS		Off
Video	Flesh Tone		Off
Picture Settings	CableClear DNR		Auto
	VSM		Off
Theater Settings
	Color Temperature		Cool
Advanced Picture Settings
	Save	Done	Reset

74 Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.

(E) 51/57/65HX93