Toshiba 46SL417U Connecting a digital audio system, You will need, Before controlling the audio

Chapter 2: Connecting your TV

Connecting a digital audio system

The TV’s DIGITAL AUDIO OUT terminal outputs a Dolby® Digital or 2-channel down-mixed PCM (pulse- code modulation) signal for use with an external Dolby Digital decoder or other external audio systems with optical audio input.

You will need:

•Optical audio cable (Use an optical audio cable that has the larger TosLink connector, not the smaller mini-optical connector.)

Dolby Digital decoder or other digital audio system

LINE IN		Optical
L	R	Audio IN

TV back panel

Optical audio cable

Before controlling the audio:

•See “Selecting the optical audio output format” (- p. 53).

Note:

•Some audio systems may not be compatible with Dolby Digital bitstream signals. Older audio systems that are not compatible with standard optical out signals may not work properly, creating a high noise level that may damage speakers or headphones. THIS DAMAGE IS NOT COVERED BY YOUR WARRANTY.

•The DIGITAL AUDIO OUT terminal may not output some digital audio sources due to copy restrictions.

•The Dolby Digital format is available in the following situations:

-When tuned to a digital RF channel.

-When an HDMI input is used.

-When DLNA Certified products or widgets are used.

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are registered trademarks of

Dolby Laboratories.

18