Toshiba 46SL417U manual Selecting the video input to view, Using Channel Return, Using SurfLock

Press B or b to select an HDMI input.

CH RTN

CH RTN

CH RTN

CH RTN

CH RTN

CH RTN

CH RTN

Chapter 6: Basic features

Using Channel Return

You can switch between two channels without entering a channel number each time. This feature also works for external inputs.

1 Select the first channel you want to view.

2 Select a second channel using the Channel Number buttons (and the dash ( - ) button if needed).

3 Each time you press , the TV switches back and forth between the last two channels that were tuned.

Using SurfLock™

The SurfLock™ feature temporarily memorizes one

channel to the button, so it can be quickly returned to from any other channel. This feature also works for external inputs.

To memorize a channel to the CH RTN button:

1 Tune to the channel you want to program to the

button.

2 Press and hold for about 2 seconds until the message “Memorized” appears. The channel has

been programmed to the button.

3 You can then change channels repeatedly, and

when you press , the memorized channel will be tuned.

After pressing and then changing channels again, the memory is cleared and the button functions as Channel Return.

Selecting the video input to view

To select the video input to view:

1 Press INPUT on the remote control or TV control panel.

2 Change the input:

•Press 0–8.

•Repeatedly press B or b. Press OK .

•Repeatedly press INPUT .

Inputs

0ANT/CABLE

1Video 1

2Video 2

3ColorStream HD1

4 HDMI 1

5HDMI 2

6HDMI 3

7HDMI 4

8PC

Note:

•You can label the video input sources according to the specific devices you have connected to the TV

(- “Labeling video inputs” on p. 30).

•You can skip sources (- “Skipping video inputs” on p. 29).

•Inputs that are set to be skipped will not be available and will be skipped when selecting inputs by repeatedly pressing INPUT or B or b.

•You can select inputs that are set to be skipped using the number buttons.

•If one or more HDMI® CEC devices are connected to an

HDMI input, the icon ( ) appears in the input selector. In this case, the label (- p. 30) will not appear on the input selector.

•When the Auto Input feature is set, you can select a video input source with the remote control by pressing and holding the corresponding MODE SELECT button for 2 seconds (- p. 31).

To select an HDMI® CEC device:

1

2 Press c. The list of HDMI® CEC devices for that input appears.

3 If the input has multiple HDMI® CEC devices, use B or b to select a device.

4 Press OK .

34