Toshiba 42SL417U, 46SL417U Navigating the menu system, Start Scan, Settings Setup Quick Setup OK

Chapter 4: Initial Setup and Menu

6 Start Scan

Auto Tuning

Start Scan

Press OK .

Note: If you want to stop scanning, press while scanning.

•After scanning is complete, a channel list screen (such as the one below) will appear. Press OK or .

Auto Tuning (Antenna)

Antenna Channels Found:			14
Ch.	Type		RF Ch.
2		ATV	2
4-1			4
		DTV
4-2			4
		DTV
6		ATV	6
11		ATV	11
13		ATV	13
18		ATV	18
31		ATV	31

Note: Encrypted channels cannot be registered though these are displayed in the above list.

If some channels are not found after scanning: •Check the antenna/cable connections, and scan

again.

•Connect the TV to the antenna or cable box directly and scan again.

1 > Settings > SETUP > Quick Setup > OK .

2A confirmation message appears. Press C or c to select Yes. Press OK .

3Repeat set up to Step 6.

•If you selected Antenna previously, select

Cable.

•If you selected Cable previously, select

Antenna.

4Scan again.

7 Support Information

The Support Information screen appears. Press OK .

Note: Refer to this information if there is any problem and you need to contact Customer Support. This can be confirmed from the following operation at any time.

> Settings > SETUP > System Information >

OK .

Navigating the menu system

•To open the main menu, press on the remote control or TV control panel.

Timer	Settings	Network
Wallpaper		Media Player

•Press B, b, C, or c on the remote control or TV control panel to navigate and make selections.

•To select a menu option, press OK .

•To move to the next menu layer, press OK or B.

•To return to the previous menu layer, press		or b.
•To close a menu instantly, press	or	.

•All menus will close automatically if you do not make a selection within 60 seconds.

25