Toshiba 42SL417U manual Operating other devices, Programming the remote to operate other devices

To control the TV, press TV.

Chapter 10: Appendix

Operating other devices

Your TV remote control has one dedicated TV mode and three programmable multi-brand modes: CABLE/ SAT, BD/DVD, and AUX.

Note: To operate a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate, you must program the remote.

Mode select	Default device mode control (before
	programming)
TV	Toshiba TV
CABLE/SAT	Toshiba Satellite receiver
BD/DVD	Toshiba Blu-ray Disc™ player
AUX	Onkyo Receiver

Mode select	Device mode control (after
	programming)
TV	Toshiba TV

Programming the remote to operate other devices

Device code setup

1 Find the code for your device brand in the remote control device code table (- p. 82–87).

If multiple codes are listed, try each one separately until you find one that works.

2 Press a mode select button (CABLE/SAT, BD/DVD, or AUX).

3 While holding down Q, input the 4-digit code for your device.

4 Point the remote at the device. Press POWER to test the code.

ResultMeaning

The device responds. Valid code

CABLE/SAT

The device does not

Invalid code

BD/DVD Multi-brand video/audio devices

respond.

Repeat the procedure, using another code

AUX

Note: If you cannot program the TV’s remote to operate your device or some of its features, use the device’s remote or the controls on the device.

5 When programming is complete, test all necessary keys on the TV’s remote that operate your device. If some keys are not operational, repeat the device code setup using another code (if other codes are listed for your device).

6

7 If your VCR does not respond to the codes for your VCR brand, and has a switch labeled VCR1/VCR2, set the switch to the other position, then program the remote control.

Note: Every time you change the batteries, you must reprogram the remote.

79