Toshiba D-R17DTKB owner manual Selecting the Sound Mode, Setting External Input Audio, 36 EN

Select “Recording” using [U / D], then press [ENTER/OK].

E7J70BD_EN.book Page 36 Monday, May 7, 2007 3:31 PM

Selecting the Sound Mode

This unit can receive bilingual broadcasts.

You can switch between modes by pressing [AUDIO ] on the remote control. Each mode is indicated on the TV. When you record a DVB channel, only output sound channel will be recorded.

Setting External Input Audio

Video	VR
DVD-RW	DVD-RW DVD-R DVD+RW

DVD+R

When the external input audio is a bilingual broadcast, you can choose “Stereo” or “Bilingual” to record on a DVD. This setting is only for recording external input (AV1/AV2/AV3).

1 In stop mode, press [SETUP]. Select “General Setting” using [U / D], then press [ENTER/OK].

2 Select “Recording” using [U / D], then press [ENTER/OK].

3 Select “External Input Audio” using

[U / D], then press [ENTER/OK].

General Setting

Playback
Display	Auto Chapter
Video	Recording Audio Select (XP)
Recording	Auto Finalise
Clock	Aspect Ratio (Video mode)
Channel	Make Recording Compatible
DivX	Bilingual Recording Audio
HDMI	External Input Audio
Reset All

4 Select “Stereo” or “Bilingual” using
[U / D], then press [ENTER/OK].
General Setting
Playback
Display		Auto Chapter
Video		Recording Audio Select (XP)
Recording		Auto Finalise
Clock	External Input Audio
	Stereo	Aspect Ratio (Video mode)
Channel		Compatible
DivX	BilingualBilingual Recording Audio
HDMI		External Input Audio
Reset All
5 Press [SETUP] to exit.

Hint

•If you select “Stereo”:

The audio will be recorded as “stereo audio”.

•If you select “Bilingual”:

The audio will be recorded as “bilingual audio” (see “Setting Bilingual Recording Audio” for more detail).

Setting Bilingual Recording Audio

Video

DVD-RW DVD-R DVD+RW DVD+R

You can select either “Main” or “Sub” audio to record a bilingual broadcast in Video mode or +VR mode. This setting is only for recording analogue channel.

1 In stop mode, press [SETUP]. Select “General Setting” using [U / D], then press [ENTER/OK].

2

3 Select “Bilingual Recording Audio” using [U / D], then press [ENTER/OK].

4 Select “Main” or “Sub” using
[U / D], then press [ENTER/OK].
General Setting
Playback
Display		Auto Chapter
Video		Recording Audio Select (XP)
Recording		Auto Finalise
Clock	Bilingual Recording Audio
	Main	Aspect Ratio (Video mode)
Channel		Compatible
DivX	Sub	Bilingual Recording Audio
HDMI		External Input Audio
Reset All
5 Press [SETUP] to exit.

Note

•If you are recording onto a VR mode disc, both “Main” and “Sub” will be recorded regardless of your setting here. And when you play back, you can choose either audio format or a combination of both as your playback audio.

Recording Audio Select (XP)

Video	VR
DVD-RW	DVD-RW DVD-R DVD+RW

DVD+R

You can enjoy high quality sound recording. This function works only when the recording mode is set at XP.

1 In stop mode, press [SETUP]. Select “General Setting” using [U / D], then press [ENTER/OK].

2 Select “Recording” using [U / D], then press [ENTER/OK].

3 Select “Recording Audio Select (XP)” using [U / D], then press [ENTER/OK].

36 EN